diff options
| author | Marcel Holtmann <marcel@holtmann.org> | 2006-06-18 05:26:51 +0000 |
|---|---|---|
| committer | Marcel Holtmann <marcel@holtmann.org> | 2006-06-18 05:26:51 +0000 |
| commit | 967953061a21b895983fb9c9fb8b8b29cef32394 (patch) | |
| tree | 7360810ab55a8ed9c0e10b75ce9f193898f0f7e0 /hcid | |
| parent | 2b40676d66c08e08633e5802b75bb96611b09e3a (diff) | |
Remove deleted configuration options
Diffstat (limited to 'hcid')
| -rw-r--r-- | hcid/hcid.conf.5 | 25 |
1 files changed, 1 insertions, 24 deletions
diff --git a/hcid/hcid.conf.5 b/hcid/hcid.conf.5 index 085d50b7..9e59b146 100644 --- a/hcid/hcid.conf.5 +++ b/hcid/hcid.conf.5 @@ -94,21 +94,6 @@ the host name. .TP -\fBauth\fP enable|disable -Enables or disables authentication between local and remote devices when they connect. - -Authentication is done following a challenge\-response mechanism described in the Bluetooth Specification 1.2 volume 2 part C section 4.2, and uses the link key generated during pairing as the shared secret. - -Activating this option sets the local device into Bluetooth security mode 3. - -.TP -\fBencrypt\fP enable|disable -Enable or disable link encryption. Should be set to enable in most cases, unless one of the devices does not support encryption for some reason. - -Encryption can only occur on authenticated connections, as a shared secret key is necessary for encryption to work. The detailed encryption mechanism is described in the bluetooth specification as mentioned above. - - -.TP \fBclass\fP 0x\fISSDDdd\fP (three bytes) The Bluetooth Device Class is described in the Bluetooth Specification section 1.2 ("Assigned Numbers \- Bluetooth Baseband"). @@ -211,18 +196,10 @@ park: this is a mode where the device is put on standby on the piconet, for pow rswitch: this is a mode that enables role\-switch (master <\-> slave) between two devices in a piconet. It is not clear whether this needs to be enabled in order to make the "lm master" setting work properly or not. - - -.TP -\fBpkt_type\fP DH1,DM1,HV1, etc. - -This fairly obscure option determines the packet types that the bluetooth device will send or accept. This is a very low\-level option that should probably not be changed for normal use. You do not need to specify defaults. - -You can check the Bluetooth specification version 1.2 Volume 2, Part B section 6 for more details about this. .SH "FILES" .TP .I /etc/bluetooth/hcid.conf Default location of the global configuration file. .SH "AUTHOR" -This manual page was written by Edouard Lafargue, Fredrik Noring and Maxim Krasnyansky. +This manual page was written by Edouard Lafargue, Fredrik Noring, Maxim Krasnyansky and Marcel Holtmann. |