From 1c57015e3e0a917d3b3df7fa61017aed6abf7d0d Mon Sep 17 00:00:00 2001
From: Marcel Holtmann <marcel@holtmann.org>
Date: Sat, 16 Nov 2002 02:33:57 +0000
Subject: Update of the manpage for rfcomm

---
 rfcomm/rfcomm.1 | 47 ++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 44 insertions(+), 3 deletions(-)

diff --git a/rfcomm/rfcomm.1 b/rfcomm/rfcomm.1
index 51a258dc..2164febe 100644
--- a/rfcomm/rfcomm.1
+++ b/rfcomm/rfcomm.1
@@ -20,8 +20,8 @@
 rfcomm \- RFCOMM configuration utility
 .SH SYNOPSIS
 .BR "rfcomm
-[-i
-.I hciX | bdaddr
+[
+.I options
 ] <
 .I command
 > <
@@ -30,7 +30,48 @@ rfcomm \- RFCOMM configuration utility
 .SH DESCRIPTION
 .B rfcomm
 is used to set up, maintain, and inspect the RFCOMM configuration
-of the Bluetooth subsystem in the Linux kernel.
+of the Bluetooth subsystem in the Linux kernel. If no
+.B command
+is given, or if the option
+.B -a
+is used,
+.B rfcomm
+prints information about the configured RFCOMM devices.
+.SH OPTIONS
+.TP
+.BI -h
+Gives a list of possible commands.
+.TP
+.BI -a
+Prints information about all configured RFCOMM devices.
+.TP
+.BI -i " <hciX> | <bdaddr>"
+The command is applied to device
+.I
+hciX
+, which must be the name or the address of an installed Bluetooth
+device. If not specified, the command will be use the first
+available Bluetooth device.
+.SH COMMANDS
+.TP
+.BI show " <dev>"
+Display the information about the specified device.
+.TP
+.BI conn " <dev> [bdaddr] [channel]"
+Connect the RFCOMM device to the remote Bluetooth device on the
+specified channel. If no channel is specified, it will use the
+channel number 1. If also the Bluetooth address is left out, it
+tries to read the data from the config file. This command can
+be terminated with the key sequence CTRL-C.
+.TP
+.BI bind " <dev> [bdaddr] [channel]"
+This binds the RFCOMM device to a remote Bluetooth device. The
+command did not establish a connection to the remote device, it
+only creates the binding. The connection will be establish right
+after an application tries to open the RFCOMM device.
+.TP
+.BI release " <dev>"
+This command releases a defined RFCOMM binding.
 .SH AUTHOR
 Written by Marcel Holtmann <marcel@holtmann.org>.
 .br
-- 
cgit