path: root/ChangeLog

ver 3.23:
	Fix key search function to honor the mmap area size.
	Fix Avahi integration of network service.
	Add new plugin communication for audio service.
	Enable basic AVRCP support by default.
	More optimizations to the SBC library.
	Create common error definitions.

	Note:
	This version needs at least bluez-libs-3.23

ver 3.22:
	Add missing include file from audio service.
	Add SBC conformance test utility.
	Add basic uinput support for AVRCP.
	Fix L2CAP socket leak in audio service.
	Fix buffer usage in GStreamer plugin.

	Note:
	This version needs at least bluez-libs-3.22

ver 3.21:
	Add initial AVRCP support.
	Add A2DP sink support to GStreamer plugin.
	Fix interoperability with A2DP suspend.
	Fix sign error in 8-subband encoder.
	Fix handling of service classes length size.
	Store Extended Inquiry Response data information.
	Publish device id information through EIR.
	Support higher baud rates for Ericcson based chips.

	Note:
	This version needs at least bluez-libs-3.21

ver 3.20:
	Fix GStreamer plugin file type detection.
	Fix potential infinite loop in inotify support.
	Fix D-Bus signatures for dict handling.
	Fix issues with service activation.
	Fix SDP failure handling of audio service.
	Fix various memory leaks in input service.
	Add secure device creation method to input service.
	Add service information methods to serial service.
	Add config file support to network service.
	Add scripting capability to network service.
	Add special on-mode handling.
	Add optimization for SBC encoder.
	Add tweaks for D-Bus 1.1.x libraries.
	Add support for inquiry transmit power level.

	Note:
	This version needs at least bluez-libs-3.20

ver 3.19:
	Limit range of bitpool announced while in ACP side.
	Use poll instead of usleep to wait for worker thread.
	Use default event mask from the specification.
	Add HID proxy support for Logitech diNovo Edge dongle.
	Add refresh option to re-request device names.
	Show correct connection link type.

	Note:
	This version needs at least bluez-libs-3.19

ver 3.18:
	Implement proper locking for headsets.
	Fix various A2DP SEP locking issues.
	Fix and cleanup audio stream handling.
	Fix stream starting if suspend request is pending.
	Fix A2DP and AVDTP endianess problems.
	Add network timeout and retransmission support.
	Add more detailed decoding of EIR elements.

	Note:
	This version needs at least bluez-libs-3.18

ver 3.17:
	Fix crashes in audio and network services.
	Check PAN source and destination roles.
	Only export the needed symbols for the plugins.

	Note:
	This version needs at least bluez-libs-3.17

ver 3.16:
	Add support for headsets with SCO audio over HCI.
	Add support for auto-create through ALSA plugin.
	Add support for ALSA plugin parameters.
	Add GStreamer plugin with SBC decoder and encoder.
	Fix network service NAP, GN and PANU servers.
	Set EIR information from SDP database.

	Note:
	This version needs at least bluez-libs-3.16

ver 3.15:
	Add A2DP support to the audio service.
	Add proxy support to the serial service.
	Set service classes value from SDP database.

	Note:
	This version needs at least bluez-libs-3.15

ver 3.14:
	Add missing signals for the adapter interface.
	Add basic commands for Simple Pairing.
	Add correct Simple Pairing and EIR interaction.
	Add missing properties for remote information.
	Add EPoX endian quirk to the input service.
	Fix HID descriptor import and storage functions.
	Fix handling of adapters in raw mode.
	Fix remote device listing methods.

	Note:
	This version needs at least bluez-libs-3.14

ver 3.13:
	Fix some issues with the headset support.
	Fix concurrent pending connection attempts.
	Fix usage of devname instead of netdev.
	Add identifier for Nokia SyncML records.
	Add command for reading the CSR chip revision.
	Add generic CSR radio test support.

	Note:
	This version needs at least bluez-libs-3.13

ver 3.12:
	Add support for limited discovery mode.
	Add support for setting of event mask.
	Add GetRemoteServiceIdentifiers method.
	Add skeleton for local D-Bus server.
	Add headset gain control methods.
	Fix various headset implementation issues.
	Fix various serial port service issues.
	Fix various input service issues.
	Let CUPS plugin discover printers in range.
	Improve the BCM2035 UART init routine.
	Ignore connection events for non-ACL links.

	Note:
	This version needs at least bluez-libs-3.12

ver 3.11:
	Update API documentation.
	Minimize SDP root records and browse groups.
	Use same decoder for text and URL strings.
	Fix SDP pattern extraction for XML.
	Fix network connection persistent state.
	Add network connection helper methods.
	Add initial version of serial port support.
	Add class of device tracking.

	Note:
	This version needs at least bluez-libs-3.11

ver 3.10.1:
	Add option to disable installation of manual pages.
	Fix input service encryption setup.
	Fix serial service methods.
	Fix network service connection handling.
	Provide a simple init script.

ver 3.10:
	Add initial version of network service.
	Add initial version of serial service.
	Add initial version of input service.
	Add initial version of audio service.
	Add authorization framework.
	Add integer based SBC library.

	Note:
	This version needs at least bluez-libs-3.10

ver 3.9:
	Add RemoteDeviceDisconnectRequested signal.
	Add updated service framework.
	Add embedded GLib library.
	Add support for using system GLib library.
	Create internal SDP server library.

	Note:
	This version needs at least bluez-libs-3.9

ver 3.8:
	Sort discovered devices list based on their RSSI.
	Send DiscoverableTimeoutChanged signal.
	Fix local and remote name validity checking.
	Add ListRemoteDevices and ListRecentRemoteDevices methods.
	Add basic integration of confirmation concept.
	Add support for service record description via XML.
	Add support for external commands to the RFCOMM utility.
	Add experimental service and authorization API.

	Note:
	This version needs at least bluez-libs-3.8

ver 3.7:
	Fix class of device handling.
	Fix error replies with pairing and security mode 3.
	Fix disconnect method for RFCOMM connections.
	Add match pattern for service searches.
	Add support for prioritized watches.

	Note:
	This version needs at least bluez-libs-3.7

ver 3.6.1:
	Fix IO channel race conditions.
	Fix pairing issues on big endian systems.
	Fix pairing issues with page timeout errors.
	Fix pairing state for security mode 3 requests.
	Switch to user as default security manager mode.

ver 3.6:
	Update D-Bus based RFCOMM interface support.
	Use L2CAP raw sockets for HCI connection creation.
	Add periodic discovery support to the D-Bus interface.
	Add initial support for device names via EIR.
	Add proper UTF-8 validation of device names.
	Add support for the J-Three keyboard.

	Note:
	This version needs at least bluez-libs-3.6

ver 3.5:
	Fix and cleanup watch functionality.
	Add support for periodic inquiry mode.
	Add support for asynchronous SDP requests.
	Add more request owner tracking.
	Document pageto and discovto options.

	Note:
	This version needs at least bluez-libs-3.5

ver 3.4:
	Improve error reporting for failed HCI commands.
	Improve handling of CancelBonding.
	Fixed bonding reply message when disconnected.

	Note:
	This version needs at least bluez-libs-3.4

ver 3.3:
	Don't change inquiry mode for Bluetooth 1.1 adapters.
	Add udev rules for Bluetooth serial PCMCIA cards.
	Add Cancel and Release methods for passkey agents.
	Add GetRemoteClass method.
	Convert to using ppoll() and pselect().
	Initialize allocated memory to zero.
	Remove bcm203x firmware loader.

	Note:
	This version needs at least bluez-libs-3.3

ver 3.2:
	Only check for the low-level D-Bus library.
	Update possible device minor classes.
	Fix timeout for pending reply.
	Add more Inquiry with RSSI quirks.
	Sleep only 100 msecs for device detection.
	Don't send BondingCreated on link key renewal.
	Allow storing of all UTF-8 remote device names.
	Create storage filenames with a generic function.

	Note:
	This version needs at least bluez-libs-3.2

ver 3.1:
	Fix handling of raw mode devices.
	Fix busy loop in UUID extraction routine.
	Remove inquiry mode setting.
	Remove auth and encrypt settings.

	Note:
	This version needs at least bluez-libs-3.1

ver 3.0:
	Implement the new BlueZ D-Bus API.

	Note:
	This version needs at least bluez-libs-3.0

ver 2.25:
	Use %jx instead of %llx for uint64_t and int64_t.
	Allow null-terminated text strings.
	Add UUID for N-Gage games.
	Add UUID for Apple Macintosh Attributes.
	Add Apple attributes and iSync records.
	Add definitions for Apple Agent.
	Add support for the Handsfree Audio Gateway service.
	Add support for choosing a specific record handle.
	Add support for dialup/telephone connections.

	Note:
	This version needs at least bluez-libs-2.25

ver 2.24:
	Fix display of SDP text and data strings.
	Add support for device scan property.
	Update the D-Bus policy configuration file.

	Note:
	This version needs at least bluez-libs-2.24

ver 2.23:
	Update the new D-Bus interface.
	Make dfutool ready for big endian architectures.
	Add support for AVRCP specific service records.
	Add support for writing complex BCCMD commands.
	Add the new BCCMD interface utility.
	Add MicroBCSP implementation from CSR.
	Add HCI emulation tool.
	Add fake HID support for old EPoX presenters.
	Reject connections from unknown HID devices.

	Note:
	This version needs at least bluez-libs-2.23

ver 2.22:
	Remove D-Bus 0.23 support.
	Add initial version of the new D-Bus interface.
	Add support for extended inquiry response commands.
	Add support for the Logitech diNovo Media Desktop Laser.
	Add compile time buffer checks (FORTIFY SOURCE).

	Note:
	This version needs at least bluez-libs-2.22

ver 2.21:
	Move create_dirs() and create_file() into the textfile library.
	Let textfile_put() also replace the last key value pair.
	Fix memory leaks with textfile_get() usage.
	Fix infinite loops and false positive matches.
	Don't retrieve stored link keys for RAW devices.
	Document the putkey and delkey commands.
	Show supported commands also in clear text.
	Support volatile changes of the BD_ADDR for CSR chips.

	Note:
	This version needs at least bluez-libs-2.21

ver 2.20:
	Add support for extended inquiry response.
	Add support for HotSync service record.
	Add support for ActiveSync service record.
	Add ActiveSync networking support.
	Fix D-Bus crashes with new API versions.

	Note:
	This version needs at least bluez-libs-2.20

ver 2.19:
	Fix the GCC 4.0 warnings.
	Fix off by one memory allocation error.
	Fix security problem with escape characters in device name.
	Send D-Bus signals for inquiry results and remote name resolves.
	Add support for device specific SDP records.

	Note:
	This version needs at least bluez-libs-2.19

ver 2.18:
	Support D-Bus 0.23 and 0.33 API versions.
	Support reading of complex BCCMD values.
	Support minimum and maximum encryption key length.
	Add support for inquiry scan type.
	Add tool for the CSR BCCMD interface.
	Add first draft of the Audio/Video control utility.
	Add disconnect timer support for the A2DP ALSA plugin.
	Make SBC parameters configurable.
	Replace non-printable characters in device names.

	Note:
	This version needs at least bluez-libs-2.18

ver 2.17:
	Set the storage directory through ${localstatedir}.
	Add the textfile library for ASCII based file access.
	Add support for return link keys event.
	Add support for voice setting configuration.
	Add support for page scan timeout configuration.
	Add support for storing and deleting of stored link keys.
	Add support for searching for services with UUID-128.
	Add support for retrieving all possible service records.
	Add support for a raw mode view of service records.
	Add support for HID information caching in hidd.
	Add support for authentication in pand and dund.
	Add support for changing BD_ADDR of CSR chips.
	Add pskey utility for changing CSR persistent storage values.
	Add the firmware upgrade utility.
	Add connection caching for the A2DP ALSA plugin.

	Note:
	This version needs at least bluez-libs-2.17

ver 2.16:
	Store link keys in ASCII based file format.
	Support device name caching.
	Support zero length data sizes in l2test.
	Change default l2ping data size to 44 bytes.
	Hide the server record and the public browse group root.
	Read BD_ADDR if not set and if it is a raw device.
	Add SDP language attributes.
	Add support for browsing the L2CAP group.
	Add support for stored pin codes for outgoing connections.
	Add support for local commands and extended features.
	Add support for reading CSR panic and fault codes.
	Add config option for setting the inquiry mode.
	Add OUI decoding support.
	Use unlimited inquiry responses as default.
	Use cached device names for PIN request.
	Use the clock offset when getting the remote names.

	Note:
	This version needs at least bluez-libs-2.16

ver 2.15:
	Enable the RFCOMM service level security.
	Add command for reading the clock offset.
	Add command for reading the clock.
	Don't configure raw devices.
	Don't set inquiry scan or page scan on raw devices.
	Don't show extended information for raw devices.
	Support L2CAP signal sizes bigger than 2048 bytes.
	Cleanup of the socket handling code of the test programs.

	Note:
	This version needs at least bluez-libs-2.15

ver 2.14:
	Make use of additional connection information.
	Use library function for reading the RSSI.
	Use library function for reading the link quality.
	Use library function for reading the transmit power level.
	Use library functions for the link supervision timeout.
	Add tool for changing the device address.

	Note:
	This version needs at least bluez-libs-2.14

ver 2.13:
	Use file permission 0600 for the link key file.
	Add support for HID attribute descriptions.
	Add support for Device ID attributes.
	Various whitespace cleanups.

	Note:
	This version needs at least bluez-libs-2.13

ver 2.12:
	Inherit the device specific options from the default.
	Use --device for selecting the source device.
	Add --nosdp option for devices with resource limitation.
	Add support and parameter option for secure mode.
	Add a lot of build ids and hardware revisions.
	Update UUID translation tables.

	Note:
	This version needs at least bluez-libs-2.12

ver 2.11:
	Various cleanups to avoid inclusion of kernel headers.
	Fix output when the CUPS backend is called without arguments.
	Fix problems with a 64 bit userland.
	Use Bluetooth library functions if available.
	Use standard numbering scheme of SDP record handles.
	Add a master option to the hidd.
	Add support for changing the link key of a connection.
	Add support for requesting encryption on keyboards.
	Add support for revision information of Digianswer devices.
	Add support for the Zoom, IBM and TDK PCMCIA cards.
	Add checks for the OpenOBEX and the ALSA libraries.
	Add experimental mRouter support.

	Note:
	This version needs at least bluez-libs-2.11

ver 2.10:
	Use a define for the configuration directory.
	Fix string initialization for flags translation.
	Check for usb_get_busses() and usb_interrupt_read().
	Add optional support for compiling with PIE.
	Make installation of the init scripts optional.
	Make compiling with debug information optional.
	Don't override CFLAGS from configure.

	Note:
	This version needs at least bluez-libs-2.10

ver 2.9:
	Retry SDP connect if busy in the CUPS backend.
	Use packet type and allow role switch in hcitool.
	Use the functions from the USB library for hid2hci.
	Add Broadcom firmware loader.
	Add EPoX endian quirk for buggy keyboards.
	Update the autoconf/automake scripts.

	Note:
	This version needs at least bluez-libs-2.9

ver 2.8:
	Use LIBS and LDADD instead of LDFLAGS.
	Use HIDP subclass field for HID boot protocol.
	Set olen before calling getsockopt() in pand.
	Restore signals for dev-up script.
	Add PID file support for pand.
	Add size parameter to expand_name() in hcid.
	Add support for audio source and audio sink SDP records.
	Add support for HID virtual cable unplug.
	Add support for AmbiCom BT2000C card.

	Note:
	This version needs at least bluez-libs-2.8

ver 2.7:
	Add support for getting the AFH channel map.
	Add support for AFH mode.
	Add support for inquiry mode.
	Add Bluetooth backend for CUPS.
	Add the hid2hci utility.
	Add the hidd utility.
	Add the pand utility.
	Add the dund utility.
	More endian bug fixes.
	Give udev some time to create the RFCOMM device nodes.
	Release the TTY if no device node is found.
	New startup script for the Bluetooth subsystem.
	Update to the autoconf stuff.

	Note:
	This version needs at least bluez-libs-2.7

ver 2.6:
	Change default prefix to /usr.
	Add manpages for hcid and hcid.conf.
	Add the sdpd server daemon.
	Add the sdptool utility.
	Add the ciptool utility.

	Note:
	This version needs at least bluez-libs-2.6

ver 2.5:
	hcitool changes:
		Support for requesting authentication.
		Support for setting connection encryption.
		Fix some endian problems.
	hciconfig changes:
		Show revision information for Broadcom devices.
		Replace unprintable characters in device name.
	hcid changes:
		Add D-Bus support for PIN request.
		Report an error on PIN helper failure.
		Fix some 64-bit problems.
	Update bluepin script for GTK2.

ver 2.4:
	hcitool changes:
		Increase number of inquiry responses.
		Support for transmit power level.
		Minor updates.
	hciconfig changes:
		Display all 8 bytes of the features.
		Add support for reading and writing of IAC.
		Correct decoding class of device.
		Use Ericsson revision command for ST Microelectronics devices.
		Display AVM firmware version with 'revision' command.
		New code for CSR specific revision information.
	hciattach changes:
		Support for ST Microelectronics specific initialization.
		Support for 3Com card version 3.0.
		Support for TDK, IBM and Socket cards.
		Support for initial baud rate.
	Update man pages.
	Fixes for some memory leaks.

ver 2.3:
	hciconfig changes:
		CSR firmware version is now displayed by 'revision' command.
		Voice command is working properly on big endian machines.
	hciattach changes:
		Added support for Texas Bluetooth modules.
		Added support for high UART baud rates on Ericsson modules.
		BCSP initialization fixes.
	Support for role switch command (hcitool).
	RFCOMM config file parser fixes.
	Update man pages.
	Removed GLib dependency.

ver 2.2:
	Support for voice settings (hciconfig).
	Minor hcitool fixes.
	Improved configure script.
	Added Headset testing tool.
	Updated man pages.
	RPM package.

ver 2.1:
	Improved BCSP initialization (hciattach).
	Support for displaying link quality (hcitool).
	Support for changing link supervision timeout (hcitool).
	New RFCOMM TTY configuration tool (rfcomm).
	Minor fixes and updates.

ver 2.0:
	BCSP initialization (hciattach).
	Minor hciconfig fixes.	

ver 2.0-pr13:
	Support for multiple pairing modes.
	Link key database handling fixes.

ver 2.0-pre12:
	Removed max link key limit. Keys never expire.
	Link key database is always updated. Reread PIN on SIGHUP (hcid).
	Bluetooth script starts SDPd, if installed.
	Other minor fixes.

ver 2.0-pre11:
	Improved link key management and more verbose logging (hcid).
	Fixed scan command (hcitool).

ver 2.0-pre10:
	Support for reading RSSI, remote name and changing
	connection type (hcitool). 
	Device initialization fixes (hcid).
	Other minor fixes and improvements.
	Build environment cleanup and fixes.

ver 2.0-pre9:
	Improved bluepin. Working X authentication.
	Improved hcitool. New flexible cmd syntax, additional commands.
	Human readable display of the device features.

ver 2.0-pre8:
	Additional hciconfig commands. Support for ACL and SCO MTU ioctls.
	Support for Inventel and COM1 UART based devices.
	Minor hcitool fixes.
	Improved l2test. New L2CAP test modes.
	Minor cleanup.

ver 2.0-pre7:
	Bluetooth utilities is now a separate package.
	New build environment uses automake.
	Moved all config files and security data to /etc/bluetooth.
	Various cleanups.

	Note:
	Please move your /etc/hcid.conf to /etc/bluetooth

ver 2.0-pre6:
	Improved hcitool.
	l2test minor output fixes.
	hciattach opt to display list of supported devices.

ver 2.0-pre2:
	Additional HCI library functions.
	Improved CSR baud rate initialization.
	PCMCIA scripts fixes and enhancements.
	Documentation update.
	
ver 2.0-pre1:
	New UART initialization utility.
	Hot plugging support for UART based PCMCIA devices.
	SCO testing utility.
	New authentication utility (bluepin).
	Minor fixes and improvements.