summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAnders Carlsson <andersca@codefactory.se>2003-02-17 11:04:18 +0000
committerAnders Carlsson <andersca@codefactory.se>2003-02-17 11:04:18 +0000
commit108fdc542a898987f54a3d043c8b56a024cf48a3 (patch)
tree4b8658438895cd26708b9dd4a14dd027eef5be58
parent3c8db267892bbce5c82d5060cef993dd54dc6ed4 (diff)
2003-02-17 Anders Carlsson <andersca@codefactory.se>
* doc/dbus-specification.sgml: Specification updates.
-rw-r--r--ChangeLog5
-rw-r--r--doc/dbus-specification.sgml261
2 files changed, 264 insertions, 2 deletions
diff --git a/ChangeLog b/ChangeLog
index f339ef3b..a309338c 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,5 +1,10 @@
2003-02-17 Anders Carlsson <andersca@codefactory.se>
+ * doc/dbus-specification.sgml:
+ Specification updates.
+
+2003-02-17 Anders Carlsson <andersca@codefactory.se>
+
* bus/activation.c: (bus_activation_init), (child_setup),
(bus_activation_activate_service):
* bus/activation.h:
diff --git a/doc/dbus-specification.sgml b/doc/dbus-specification.sgml
index 6412bf5b..b7d315e9 100644
--- a/doc/dbus-specification.sgml
+++ b/doc/dbus-specification.sgml
@@ -413,10 +413,267 @@
and maps fairly directly from the SASL specification.
</para>
<para>
- [move the dbus-sasl-profile.txt stuff into here and clean it up]
+ In examples, "C:" and "S:" indicate lines sent by the client and
+ server respectively.
</para>
- </sect1>
+ <sect2 id="auth-protocol-overview">
+ <title>Protocol Overview</title>
+ <para>
+The protocol is a line-based protocol, where each line ends with
+\r\n. Each line begins with an all-caps ASCII command name containing
+only the character range [A-Z], a space, then any arguments for the
+command, then the \r\n ending the line. The protocol is
+case-sensitive. All bytes must be in the ASCII character set.
+
+Commands from the client to the server are as follows:
+
+ <itemizedlist>
+ <listitem><para>AUTH [mechanism] [initial-response]</para></listitem>
+ <listitem><para>CANCEL</para></listitem
+ <listitem><para>BEGIN</para></listitem>
+ <listitem><para>DATA &lt;data in base 64 encoding&gt;</para></listitem>
+ <listitem><para>ERROR [human-readable error explanation]</para></listitem>
+ </itemizedlist>
+
+From server to client are as follows:
+
+ <itemizedlist>
+ <listitem><para>REJECTED &lt;space-separated list of mechanism names&gt;</para></listitem>
+ <listitem><para>OK</para></listitem>
+ <listitem><para>DATA &lt;data in base 64 encoding&gt;</para></listitem>
+ <listitem><para>ERROR</para></listitem>
+ </itemizedlist>
+ </para>
+ </sect2>
+ <sect2 id="auth-nul-byte">
+ <title>Special credentials-passing nul byte</title>
+ <para>
+Immediately after connecting to the server, the client must send a
+single nul byte. This byte may be accompanied by credentials
+information on some operating systems that use sendmsg() with
+SCM_CREDS or SCM_CREDENTIALS to pass credentials over UNIX domain
+sockets. However, the nul byte MUST be sent even on other kinds of
+socket, and even on operating systems that do not require a byte to be
+sent in order to transmit credentials. The text protocol described in
+this document begins after the single nul byte. If the first byte
+received from the client is not a nul byte, the server may disconnect
+that client.
+</para>
+<para>
+A nul byte in any context other than the initial byte is an error;
+the protocol is ASCII-only.
+</para>
+<para>
+The credentials sent along with the nul byte may be used with the
+SASL mechanism EXTERNAL.
+
+ </para>
+ </sect2>
+ <sect2 id="auth-command-auth">
+ <title>AUTH command</title>
+<para>
+ If an AUTH command has no arguments, it is a request to list
+ available mechanisms. The server SHOULD respond with a REJECTED
+ command listing the mechanisms it understands.
+</para>
+<para>
+ If an AUTH command specifies a mechanism, and the server supports
+ said mechanism, the server SHOULD begin exchanging SASL
+ challenge-response data with the client using DATA commands.
+</para>
+<para>
+ If the server does not support the mechanism given in the AUTH
+ command, it SHOULD send a REJECTED command listing the mechanisms
+ it does support.
+</para>
+<para>
+ If the [initial-response] argument is provided, it is intended for
+ use with mechanisms that have no initial challenge (or an empty
+ initial challenge), as if it were the argument to an initial DATA
+ command. If the selected mechanism has an initial challenge, the
+ server should reject authentication by sending REJECTED.
+</para>
+<para>
+ If authentication succeeds after exchanging DATA commands,
+ an OK command should be sent to the client.
+</para>
+<para>
+ The first octet received by the client after the \r\n of the OK
+ command MUST be the first octet of the authenticated/encrypted
+ stream of D-BUS messages.
+</para>
+<para>
+ The first octet received by the server after the \r\n of the BEGIN
+ command from the client MUST be the first octet of the
+ authenticated/encrypted stream of D-BUS messages.
+</para>
+ </sect2>
+ <sect2 id="auth-command-cancel">
+ <title>CANCEL Command</title>
+ <para>
+ At any time up to sending the BEGIN command, the client may send a
+ CANCEL command. On receiving the CANCEL command, the server MUST
+ send a REJECTED command and abort the current authentication
+ exchange.
+ </para>
+ </sect2>
+ <sect2 id="auth-command-data">
+ <title>DATA Command</title>
+ <para>
+ The DATA command may come from either client or server, and simply
+ contains a base64-encoded block of data to be interpreted
+ according to the SASL mechanism in use.
+ </para>
+ <para>
+ Some SASL mechanisms support sending an "empty string";
+ FIXME we need some way to do this.
+ </para>
+ </sect2>
+ <sect2 id="auth-command-begin">
+ <title>BEGIN Command</title>
+ <para>
+ The BEGIN command acknowledges that the client has received an
+ OK command from the server, and that the stream of messages
+ is about to begin.
+ </para>
+ <para>
+ The first octet received by the server after the \r\n of the BEGIN
+ command from the client MUST be the first octet of the
+ authenticated/encrypted stream of D-BUS messages.
+ </para>
+ </sect2>
+ <sect2 id="auth-command-rejected">
+ <title>REJECTED Command</title>
+ <para>
+ The REJECTED command indicates that the current authentication
+ exchange has failed, and further exchange of DATA is inappropriate.
+ The client would normally try another mechanism, or try providing
+ different responses to challenges.
+ </para><para>
+ Optionally, the REJECTED command has a space-separated list of
+ available auth mechanisms as arguments. If a server ever provides
+ a list of supported mechanisms, it MUST provide the same list
+ each time it sends a REJECTED message. Clients are free to
+ ignore all lists received after the first.
+ </para>
+ </sect2>
+ <sect2 id="auth-command-ok">
+ <title>OK Command</title>
+ <para>
+ The OK command indicates that the client has been authenticated,
+ and that further communication will be a stream of D-BUS messages
+ (optionally encrypted, as negotiated) rather than this protocol.
+ </para>
+ <para>
+ The first octet received by the client after the \r\n of the OK
+ command MUST be the first octet of the authenticated/encrypted
+ stream of D-BUS messages.
+ </para>
+ <para>
+ The client MUST respond to the OK command by sending a BEGIN
+ command, followed by its stream of messages, or by disconnecting.
+ The server MUST NOT accept additional commands using this protocol
+ after the OK command has been sent.
+ </para>
+ </sect2>
+ <sect2 id="auth-command-error">
+ <title>ERROR Command</title>
+ <para>
+ The ERROR command indicates that either server or client did not
+ know a command, does not accept the given command in the current
+ context, or did not understand the arguments to the command. This
+ allows the protocol to be extended; a client or server can send a
+ command present or permitted only in new protocol versions, and if
+ an ERROR is received instead of an appropriate response, fall back
+ to using some other technique.
+ </para><para>
+ If an ERROR is sent, the server or client MUST continue as if the
+ command causing the ERROR had never been received.
+ </para>
+ </sect2>
+ <sect2 id="auth-examples">
+ <title>Authentication examples</title>
+
+ <para>
+ <figure>
+ <title>Example of successful magic cookie authentication</title>
+ <programlisting>
+(MAGIC_COOKIE is a made up mechanism)
+ C: AUTH MAGIC_COOKIE BsAY3g4gBNo=
+ S: OK
+ C: BEGIN
+ </programlisting>
+ </figure>
+ <figure>
+ <title>Example of finding out mechanisms then picking one</title>
+ <programlisting>
+ C: AUTH
+ S: REJECTED KERBEROS_V4 SKEY
+ C: AUTH SKEY bW9yZ2Fu
+ S: DATA OTUgUWE1ODMwOA==
+ C: DATA Rk9VUiBNQU5OIFNPT04gRklSIFZBUlkgTUFTSA==
+ S: OK
+ C: BEGIN
+ </programlisting>
+ </figure>
+ <figure>
+ <title>Example of client sends unknown command then falls back to regular auth</title>
+ <programlisting>
+ C: FOOBAR
+ S: ERROR
+ C: AUTH MAGIC_COOKIE BsAY3g4gBNo=
+ S: OK
+ C: BEGIN
+ </programlisting>
+ </figure>
+ <figure>
+ <title>Example of server doesn't support initial auth mechanism</title>
+ <programlisting>
+ C: AUTH MAGIC_COOKIE BsAY3g4gBNo=
+ S: REJECTED KERBEROS_V4 SKEY
+ C: AUTH SKEY bW9yZ2Fu
+ S: DATA OTUgUWE1ODMwOA==
+ C: DATA Rk9VUiBNQU5OIFNPT04gRklSIFZBUlkgTUFTSA==
+ S: OK
+ C: BEGIN
+ </programlisting>
+ </figure>
+ <figure>
+ <title>Example of wrong password or the like followed by successful retry</title>
+ <programlisting>
+ C: AUTH MAGIC_COOKIE BsAY3g4gBNo=
+ S: REJECTED KERBEROS_V4 SKEY
+ C: AUTH SKEY bW9yZ2Fu
+ S: DATA OTUgUWE1ODMwOA==
+ C: DATA Rk9VUiBNQU5OIFNPT04gRklSIFZBUlkgTUFTSA==
+ S: REJECTED
+ C: AUTH SKEY bW9yZ2Fu
+ S: DATA OTUgUWE1ODMwOA==
+ C: DATA Rk9VUiBNQU5OIFNPT04gRklSIFZBUlkgTUFTSA==
+ S: OK
+ C: BEGIN
+ </programlisting>
+ </figure>
+ <figure>
+ <title>Example of skey cancelled and restarted</title>
+ <programlisting>
+ C: AUTH MAGIC_COOKIE BsAY3g4gBNo=
+ S: REJECTED KERBEROS_V4 SKEY
+ C: AUTH SKEY bW9yZ2Fu
+ S: DATA OTUgUWE1ODMwOA==
+ C: CANCEL
+ S: REJECTED
+ C: AUTH SKEY bW9yZ2Fu
+ S: DATA OTUgUWE1ODMwOA==
+ C: DATA Rk9VUiBNQU5OIFNPT04gRklSIFZBUlkgTUFTSA==
+ S: OK
+ C: BEGIN
+ </programlisting>
+ </figure>
+ </para>
+ </sect2>
+ </sect1>
<sect1 id="addresses">
<title>Server Addresses</title>
<para>