summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--configure.ac54
-rw-r--r--src/Makefile.am34
-rw-r--r--src/daemon/caps.c99
-rw-r--r--src/daemon/caps.h3
-rw-r--r--src/daemon/daemon-conf.c2
-rw-r--r--src/daemon/daemon.conf.in2
-rw-r--r--src/daemon/main.c203
-rw-r--r--src/modules/alsa/alsa-mixer.c24
-rw-r--r--src/modules/alsa/alsa-sink.c2
-rw-r--r--src/modules/alsa/alsa-source.c3
-rw-r--r--src/modules/alsa/alsa-util.c8
-rw-r--r--src/modules/alsa/alsa-util.h4
-rw-r--r--src/modules/alsa/mixer/paths/analog-input-aux.conf32
-rw-r--r--src/modules/alsa/mixer/paths/analog-input-fm.conf20
-rw-r--r--src/modules/alsa/mixer/paths/analog-input-linein.conf20
-rw-r--r--src/modules/alsa/mixer/paths/analog-input-mic-line.conf21
-rw-r--r--src/modules/alsa/mixer/paths/analog-input-mic.conf20
-rw-r--r--src/modules/alsa/mixer/paths/analog-input-mic.conf.common20
-rw-r--r--src/modules/alsa/mixer/paths/analog-input-tvtuner.conf20
-rw-r--r--src/modules/alsa/mixer/paths/analog-input-video.conf32
-rw-r--r--src/modules/alsa/mixer/paths/analog-input.conf21
-rw-r--r--src/modules/alsa/mixer/paths/analog-input.conf.common66
-rw-r--r--src/modules/alsa/mixer/paths/analog-output-headphones.conf20
-rw-r--r--src/modules/alsa/mixer/paths/analog-output-lfe-on-mono.conf22
-rw-r--r--src/modules/alsa/mixer/paths/analog-output-mono.conf20
-rw-r--r--src/modules/alsa/mixer/paths/analog-output.conf20
-rw-r--r--src/modules/alsa/mixer/paths/analog-output.conf.common111
-rw-r--r--src/modules/alsa/mixer/profile-sets/78-pulseaudio.rules9
-rw-r--r--src/modules/alsa/mixer/profile-sets/90-pulseaudio.rules26
-rw-r--r--src/modules/alsa/mixer/profile-sets/default.conf73
-rw-r--r--src/modules/alsa/mixer/profile-sets/native-instruments-audio4dj.conf91
-rw-r--r--src/modules/alsa/mixer/profile-sets/native-instruments-audio8dj.conf2
-rw-r--r--src/modules/alsa/module-alsa-card.c6
-rw-r--r--src/modules/alsa/module-alsa-sink.c6
-rw-r--r--src/modules/alsa/module-alsa-source.c6
-rw-r--r--src/modules/bluetooth/module-bluetooth-device.c1
-rw-r--r--src/modules/jack/module-jack-sink.c1
-rw-r--r--src/modules/jack/module-jack-source.c1
-rw-r--r--src/modules/module-combine.c1
-rw-r--r--src/modules/module-esound-sink.c1
-rw-r--r--src/modules/module-null-sink.c1
-rw-r--r--src/modules/module-pipe-sink.c1
-rw-r--r--src/modules/module-pipe-source.c1
-rw-r--r--src/modules/module-sine-source.c1
-rw-r--r--src/modules/module-tunnel.c1
-rw-r--r--src/modules/oss/module-oss.c1
-rw-r--r--src/modules/raop/module-raop-sink.c1
-rw-r--r--src/pulsecore/core-util.c204
-rw-r--r--src/pulsecore/core-util.h3
-rw-r--r--src/pulsecore/rtkit.c189
-rw-r--r--src/pulsecore/rtkit.h62
-rw-r--r--src/pulsecore/rtpoll.c176
-rw-r--r--src/pulsecore/rtpoll.h3
-rw-r--r--src/pulsecore/rtsig.c131
-rw-r--r--src/pulsecore/rtsig.h39
-rw-r--r--src/tests/rtpoll-test.c6
56 files changed, 1020 insertions, 927 deletions
diff --git a/configure.ac b/configure.ac
index bb8afa4f..1081e685 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1152,44 +1152,6 @@ AC_SUBST(DBUS_LIBS)
AC_SUBST(HAVE_DBUS)
AM_CONDITIONAL([HAVE_DBUS], [test "x$HAVE_DBUS" = x1])
-#### PolicyKit support (optional) ####
-
-AC_ARG_ENABLE([polkit],
- AS_HELP_STRING([--disable-polkit],[Disable optional PolicyKit support]),
- [
- case "${enableval}" in
- yes) polkit=yes ;;
- no) polkit=no ;;
- *) AC_MSG_ERROR(bad value ${enableval} for --disable-polkit) ;;
- esac
- ],
- [polkit=auto])
-
-if test "x${polkit}" != xno ; then
-
- PKG_CHECK_MODULES(POLKIT, [ polkit-dbus >= 0.7 ],
- [
- HAVE_POLKIT=1
- AC_DEFINE([HAVE_POLKIT], 1, [Have PolicyKit])
- policydir=`pkg-config polkit-dbus --variable prefix`/share/PolicyKit/policy/
- AC_SUBST(policydir)
- ],
- [
- HAVE_POLKIT=0
- if test "x$polkit" = xyes ; then
- AC_MSG_ERROR([*** PolicyKit support not found])
- fi
- ])
-else
- HAVE_POLKIT=0
-fi
-
-AC_SUBST(POLKIT_CFLAGS)
-AC_SUBST(POLKIT_LIBS)
-AC_SUBST(HAVE_POLKIT)
-AM_CONDITIONAL([HAVE_POLKIT], [test "x$HAVE_POLKIT" = x1])
-
-
### IPv6 connection support (optional) ###
AC_ARG_ENABLE([ipv6],
@@ -1276,15 +1238,6 @@ fi
AC_SUBST(PA_SYSTEM_GROUP)
AC_DEFINE_UNQUOTED(PA_SYSTEM_GROUP,"$PA_SYSTEM_GROUP", [Group for the PulseAudio system daemon])
-AC_ARG_WITH(realtime_group,AS_HELP_STRING([--with-realtime-group=<group>],[Group for users that are allowed to start the PulseAudio daemon with realtime scheduling (realtime)]))
-if test -z "$with_realtime_group" ; then
- PA_REALTIME_GROUP=pulse-rt
-else
- PA_REALTIME_GROUP=$with_realtime_group
-fi
-AC_SUBST(PA_REALTIME_GROUP)
-AC_DEFINE_UNQUOTED(PA_REALTIME_GROUP,"$PA_REALTIME_GROUP", [Realtime group])
-
AC_ARG_WITH(access_group,AS_HELP_STRING([--with-access-group=<group>],[Group which is allowed access to a system-wide PulseAudio daemon (pulse-access)]))
if test -z "$with_access_group" ; then
PA_ACCESS_GROUP=pulse-access
@@ -1461,11 +1414,6 @@ if test "x${HAVE_BLUEZ}" = "x1" ; then
ENABLE_BLUEZ=yes
fi
-ENABLE_POLKIT=no
-if test "x${HAVE_POLKIT}" = "x1" ; then
- ENABLE_POLKIT=yes
-fi
-
ENABLE_GDBM=no
if test "x${HAVE_GDBM}" = "x1" ; then
ENABLE_GDBM=yes
@@ -1519,7 +1467,6 @@ echo "
Enable BlueZ: ${ENABLE_BLUEZ}
Enable TCP Wrappers: ${ENABLE_TCPWRAP}
Enable libsamplerate: ${ENABLE_LIBSAMPLERATE}
- Enable PolicyKit: ${ENABLE_POLKIT}
Enable IPv6: ${ENABLE_IPV6}
Enable OpenSSL (for Airtunes): ${ENABLE_OPENSSL}
Enable tdb: ${ENABLE_TDB}
@@ -1527,7 +1474,6 @@ echo "
System User: ${PA_SYSTEM_USER}
System Group: ${PA_SYSTEM_GROUP}
- Realtime Group: ${PA_REALTIME_GROUP}
Access Group: ${PA_ACCESS_GROUP}
Enable per-user EsounD socket: ${ENABLE_PER_USER_ESOUND_SOCKET}
Force preopen: ${FORCE_PREOPEN}
diff --git a/src/Makefile.am b/src/Makefile.am
index d643e2b9..cb96070d 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -29,8 +29,8 @@ pulsecoreincludedir=$(includedir)/pulsecore
pulseconfdir=$(sysconfdir)/pulse
pulselibexecdir=$(libexecdir)/pulse
xdgautostartdir=$(sysconfdir)/xdg/autostart
-alsaprofilesetsdir=$(datadir)/alsa-mixer/profile-sets
-alsapathsdir=$(datadir)/alsa-mixer/paths
+alsaprofilesetsdir=$(datadir)/pulseaudio/alsa-mixer/profile-sets
+alsapathsdir=$(datadir)/pulseaudio/alsa-mixer/paths
udevrulesdir=/lib/udev/rules.d
###################################
@@ -114,10 +114,10 @@ EXTRA_DIST = \
modules/module-defs.h.m4 \
daemon/pulseaudio.desktop.in \
map-file \
- daemon/org.pulseaudio.policy.in \
modules/alsa/mixer/profile-sets/default.conf \
+ modules/alsa/mixer/profile-sets/native-instruments-audio4dj.conf \
modules/alsa/mixer/profile-sets/native-instruments-audio8dj.conf \
- modules/alsa/mixer/profile-sets/78-pulseaudio.rules \
+ modules/alsa/mixer/profile-sets/90-pulseaudio.rules \
modules/alsa/mixer/paths/analog-input-aux.conf \
modules/alsa/mixer/paths/analog-input.conf \
modules/alsa/mixer/paths/analog-input.conf.common \
@@ -183,16 +183,6 @@ else
pulseaudio_LDFLAGS = $(AM_LDFLAGS) $(BINLDFLAGS) -dlopen force $(foreach f,$(PREOPEN_LIBS),-dlopen $(f))
endif
-if HAVE_POLKIT
-policy_in_files = daemon/org.pulseaudio.policy.in
-policy_DATA = $(policy_in_files:.policy.in=.policy)
-@INTLTOOL_POLICY_RULE@
-
-pulseaudio_SOURCES += daemon/polkit.c daemon/polkit.h
-pulseaudio_CFLAGS += $(POLKIT_CFLAGS)
-pulseaudio_LDADD += $(POLKIT_LIBS)
-endif
-
###################################
# Utility programs #
###################################
@@ -572,6 +562,7 @@ libpulsecommon_@PA_MAJORMINORMICRO@_la_SOURCES = \
pulsecore/conf-parser.c pulsecore/conf-parser.h \
pulsecore/core-error.c pulsecore/core-error.h \
pulsecore/core-util.c pulsecore/core-util.h \
+ pulsecore/rtkit.c pulsecore/rtkit.h \
pulsecore/creds.h \
pulsecore/dynarray.c pulsecore/dynarray.h \
pulsecore/endianmacros.h \
@@ -820,7 +811,6 @@ libpulsecore_@PA_MAJORMINORMICRO@_la_SOURCES = \
pulsecore/play-memchunk.c pulsecore/play-memchunk.h \
pulsecore/resampler.c pulsecore/resampler.h \
pulsecore/rtpoll.c pulsecore/rtpoll.h \
- pulsecore/rtsig.c pulsecore/rtsig.h \
pulsecore/sample-util.c pulsecore/sample-util.h \
pulsecore/sconv-s16be.c pulsecore/sconv-s16be.h \
pulsecore/sconv-s16le.c pulsecore/sconv-s16le.h \
@@ -1050,10 +1040,11 @@ modlibexec_LTLIBRARIES += \
alsaprofilesets_DATA = \
modules/alsa/mixer/profile-sets/default.conf \
+ modules/alsa/mixer/profile-sets/native-instruments-audio4dj.conf \
modules/alsa/mixer/profile-sets/native-instruments-audio8dj.conf
udevrules_DATA = \
- modules/alsa/mixer/profile-sets/78-pulseaudio.rules
+ modules/alsa/mixer/profile-sets/90-pulseaudio.rules
alsapaths_DATA = \
modules/alsa/mixer/paths/analog-input-aux.conf \
@@ -1660,11 +1651,7 @@ module_rygel_media_server_la_CFLAGS = $(AM_CFLAGS) $(DBUS_CFLAGS)
# Some minor stuff #
###################################
-suid: pulseaudio .libs/lt-pulseaudio
- chown root $^
- chmod u+s $^
-
-CLEANFILES = esdcompat client.conf default.pa system.pa daemon.conf start-pulseaudio-x11 daemon/pulseaudio.desktop daemon/org.pulseaudio.policy
+CLEANFILES = esdcompat client.conf default.pa system.pa daemon.conf start-pulseaudio-x11 daemon/pulseaudio.desktop
esdcompat: daemon/esdcompat.in Makefile
sed -e 's,@PACKAGE_VERSION\@,$(PACKAGE_VERSION),g' \
@@ -1741,6 +1728,11 @@ update-reserve:
wget -O modules/$$i http://git.0pointer.de/\?p=reserve.git\;a=blob_plain\;f=$$i\;hb=master ; \
done
+update-rtkit:
+ for i in rtkit.c rtkit.h ; do \
+ wget -O pulsecore/$$i http://git.0pointer.de/\?p=rtkit.git\;a=blob_plain\;f=$$i\;hb=master ; \
+ done
+
# Automatically generate linker version script. We use the same one for all public .sos
update-map-file:
( echo "PULSE_0 {" ; \
diff --git a/src/daemon/caps.c b/src/daemon/caps.c
index d2ae8d0e..294be494 100644
--- a/src/daemon/caps.c
+++ b/src/daemon/caps.c
@@ -39,6 +39,7 @@
#ifdef HAVE_SYS_CAPABILITY_H
#include <sys/capability.h>
#endif
+
#ifdef HAVE_SYS_PRCTL_H
#include <sys/prctl.h>
#endif
@@ -51,12 +52,13 @@ int setresgid(gid_t r, gid_t e, gid_t s);
int setresuid(uid_t r, uid_t e, uid_t s);
#endif
-#ifdef HAVE_GETUID
-
/* Drop root rights when called SUID root */
void pa_drop_root(void) {
- uid_t uid = getuid();
+#ifdef HAVE_GETUID
+ uid_t uid;
+
+ uid = getuid();
if (uid == 0 || geteuid() != 0)
return;
@@ -73,90 +75,19 @@ void pa_drop_root(void) {
pa_assert_se(getuid() == uid);
pa_assert_se(geteuid() == uid);
-}
-
-#else
-
-void pa_drop_root(void) {
-}
-
-#endif
-
-#if defined(HAVE_SYS_CAPABILITY_H) && defined(HAVE_SYS_PRCTL_H)
-
-/* Limit permitted capabilities set to CAPSYS_NICE */
-void pa_limit_caps(void) {
- cap_t caps;
- cap_value_t nice_cap = CAP_SYS_NICE;
-
- pa_assert_se(caps = cap_init());
- pa_assert_se(cap_clear(caps) == 0);
- pa_assert_se(cap_set_flag(caps, CAP_EFFECTIVE, 1, &nice_cap, CAP_SET) == 0);
- pa_assert_se(cap_set_flag(caps, CAP_PERMITTED, 1, &nice_cap, CAP_SET) == 0);
-
- if (cap_set_proc(caps) < 0)
- /* Hmm, so we couldn't limit our caps, which probably means we
- * hadn't any in the first place, so let's just make sure of
- * that */
- pa_drop_caps();
- else
- pa_log_info(_("Limited capabilities successfully to CAP_SYS_NICE."));
-
- pa_assert_se(cap_free(caps) == 0);
-
- pa_assert_se(prctl(PR_SET_KEEPCAPS, 1, 0, 0, 0) == 0);
-}
-
-/* Drop all capabilities, effectively becoming a normal user */
-void pa_drop_caps(void) {
- cap_t caps;
-
-#ifndef __OPTIMIZE__
- /* Valgrind doesn't not know set_caps, so we bypass it here -- but
- * only in development builds.*/
-
- if (pa_in_valgrind() && !pa_have_caps())
- return;
#endif
+#ifdef HAVE_SYS_PRCTL_H
pa_assert_se(prctl(PR_SET_KEEPCAPS, 0, 0, 0, 0) == 0);
-
- pa_assert_se(caps = cap_init());
- pa_assert_se(cap_clear(caps) == 0);
- pa_assert_se(cap_set_proc(caps) == 0);
- pa_assert_se(cap_free(caps) == 0);
-
- pa_assert_se(!pa_have_caps());
-}
-
-pa_bool_t pa_have_caps(void) {
- cap_t caps;
- cap_flag_value_t flag = CAP_CLEAR;
-
-#ifdef __OPTIMIZE__
- pa_assert_se(caps = cap_get_proc());
-#else
- if (!(caps = cap_get_proc()))
- return FALSE;
#endif
- pa_assert_se(cap_get_flag(caps, CAP_SYS_NICE, CAP_EFFECTIVE, &flag) >= 0);
- pa_assert_se(cap_free(caps) == 0);
-
- return flag == CAP_SET;
-}
-
-#else
-
-/* NOOPs in case capabilities are not available. */
-void pa_limit_caps(void) {
-}
-
-void pa_drop_caps(void) {
- pa_drop_root();
-}
-
-pa_bool_t pa_have_caps(void) {
- return FALSE;
-}
+#ifdef HAVE_SYS_CAPABILITY_H
+ {
+ cap_t caps;
+ pa_assert_se(caps = cap_init());
+ pa_assert_se(cap_clear(caps) == 0);
+ pa_assert_se(cap_set_proc(caps) == 0);
+ pa_assert_se(cap_free(caps) == 0);
+ }
#endif
+}
diff --git a/src/daemon/caps.h b/src/daemon/caps.h
index 94241a9a..5d0ee62e 100644
--- a/src/daemon/caps.h
+++ b/src/daemon/caps.h
@@ -25,8 +25,5 @@
#include <pulsecore/macro.h>
void pa_drop_root(void);
-void pa_drop_caps(void);
-void pa_limit_caps(void);
-pa_bool_t pa_have_caps(void);
#endif
diff --git a/src/daemon/daemon-conf.c b/src/daemon/daemon-conf.c
index 664e4fde..9010f2f6 100644
--- a/src/daemon/daemon-conf.c
+++ b/src/daemon/daemon-conf.c
@@ -60,7 +60,7 @@ static const pa_daemon_conf default_conf = {
.fail = TRUE,
.high_priority = TRUE,
.nice_level = -11,
- .realtime_scheduling = FALSE,
+ .realtime_scheduling = TRUE,
.realtime_priority = 5, /* Half of JACK's default rtprio */
.disallow_module_loading = FALSE,
.disallow_exit = FALSE,
diff --git a/src/daemon/daemon.conf.in b/src/daemon/daemon.conf.in
index d119716d..6931359c 100644
--- a/src/daemon/daemon.conf.in
+++ b/src/daemon/daemon.conf.in
@@ -33,7 +33,7 @@
; high-priority = yes
; nice-level = -11
-; realtime-scheduling = no
+; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
diff --git a/src/daemon/main.c b/src/daemon/main.c
index 8058e122..2ecd6c2f 100644
--- a/src/daemon/main.c
+++ b/src/daemon/main.c
@@ -84,7 +84,6 @@
#include <pulsecore/pid.h>
#include <pulsecore/namereg.h>
#include <pulsecore/random.h>
-#include <pulsecore/rtsig.h>
#include <pulsecore/rtclock.h>
#include <pulsecore/macro.h>
#include <pulsecore/mutex.h>
@@ -102,7 +101,6 @@
#include "dumpmodules.h"
#include "caps.h"
#include "ltdl-bind-now.h"
-#include "polkit.h"
#ifdef HAVE_LIBWRAP
/* Only one instance of these variables */
@@ -381,9 +379,7 @@ int main(int argc, char *argv[]) {
pa_mainloop *mainloop = NULL;
char *s;
int r = 0, retval = 1, d = 0;
- pa_bool_t suid_root, real_root;
pa_bool_t valid_pid_file = FALSE;
- gid_t gid = (gid_t) -1;
pa_bool_t ltdl_init = FALSE;
int passed_fd = -1;
const char *e;
@@ -426,30 +422,6 @@ int main(int argc, char *argv[]) {
}
#endif
-#ifdef HAVE_GETUID
- real_root = getuid() == 0;
- suid_root = !real_root && geteuid() == 0;
-#else
- real_root = FALSE;
- suid_root = FALSE;
-#endif
-
- if (!real_root) {
- /* Drop all capabilities except CAP_SYS_NICE */
- pa_limit_caps();
-
- /* Drop privileges, but keep CAP_SYS_NICE */
- pa_drop_root();
-
- /* After dropping root, the effective set is reset, hence,
- * let's raise it again */
- pa_limit_caps();
-
- /* When capabilities are not supported we will not be able to
- * acquire RT sched anymore. But yes, that's the way it is. It
- * is just too risky tun let PA run as root all the time. */
- }
-
if ((e = getenv("PULSE_PASSED_FD"))) {
passed_fd = atoi(e);
@@ -457,15 +429,14 @@ int main(int argc, char *argv[]) {
passed_fd = -1;
}
+ /* We might be autospawned, in which case have no idea in which
+ * context we have been started. Let's cleanup our execution
+ * context as good as possible */
+ pa_drop_root();
pa_close_all(passed_fd, -1);
-
pa_reset_sigs(-1);
pa_unblock_sigs(-1);
- /* At this point, we are a normal user, possibly with CAP_NICE if
- * we were started SUID. If we are started as normal root, than we
- * still are normal root. */
-
setlocale(LC_ALL, "");
pa_init_i18n();
@@ -490,150 +461,6 @@ int main(int argc, char *argv[]) {
pa_log_set_flags(PA_LOG_PRINT_TIME, PA_LOG_SET);
pa_log_set_show_backtrace(conf->log_backtrace);
- pa_log_debug("Started as real root: %s, suid root: %s", pa_yes_no(real_root), pa_yes_no(suid_root));
-
- if (!real_root && pa_have_caps()) {
-#ifdef HAVE_SYS_RESOURCE_H
- struct rlimit rl;
-#endif
- pa_bool_t allow_high_priority = FALSE, allow_realtime = FALSE;
-
- /* Let's better not enable high prio or RT by default */
-
- if (conf->high_priority && !allow_high_priority) {
- if (pa_own_uid_in_group(PA_REALTIME_GROUP, &gid) > 0) {
- pa_log_info(_("We're in the group '%s', allowing high-priority scheduling."), PA_REALTIME_GROUP);
- allow_high_priority = TRUE;
- }
- }
-
- if (conf->realtime_scheduling && !allow_realtime) {
- if (pa_own_uid_in_group(PA_REALTIME_GROUP, &gid) > 0) {
- pa_log_info(_("We're in the group '%s', allowing real-time scheduling."), PA_REALTIME_GROUP);
- allow_realtime = TRUE;
- }
- }
-
-#ifdef HAVE_POLKIT
- if (conf->high_priority && !allow_high_priority) {
- if (pa_polkit_check("org.pulseaudio.acquire-high-priority") > 0) {
- pa_log_info(_("PolicyKit grants us acquire-high-priority privilege."));
- allow_high_priority = TRUE;
- } else
- pa_log_info(_("PolicyKit refuses acquire-high-priority privilege."));
- }
-
- if (conf->realtime_scheduling && !allow_realtime) {
- if (pa_polkit_check("org.pulseaudio.acquire-real-time") > 0) {
- pa_log_info(_("PolicyKit grants us acquire-real-time privilege."));
- allow_realtime = TRUE;
- } else
- pa_log_info(_("PolicyKit refuses acquire-real-time privilege."));
- }
-#endif
-
- if (!allow_high_priority && !allow_realtime) {
-
- /* OK, there's no further need to keep CAP_NICE. Hence
- * let's give it up early */
-
- pa_drop_caps();
- }
-
-#ifdef RLIMIT_RTPRIO
- if (getrlimit(RLIMIT_RTPRIO, &rl) >= 0)
- if (rl.rlim_cur > 0) {
- pa_log_info("RLIMIT_RTPRIO is set to %u, allowing real-time scheduling.", (unsigned) rl.rlim_cur);
- allow_realtime = TRUE;
- }
-#endif
-#ifdef RLIMIT_NICE
- if (getrlimit(RLIMIT_NICE, &rl) >= 0)
- if (rl.rlim_cur > 20 ) {
- pa_log_info("RLIMIT_NICE is set to %u, allowing high-priority scheduling.", (unsigned) rl.rlim_cur);
- allow_high_priority = TRUE;
- }
-#endif
-
- if ((conf->high_priority && !allow_high_priority) ||
- (conf->realtime_scheduling && !allow_realtime))
- pa_log_info(_("Called SUID root and real-time and/or high-priority scheduling was requested in the configuration. However, we lack the necessary privileges:\n"
- "We are not in group '%s', PolicyKit refuse to grant us the requested privileges and we have no increase RLIMIT_NICE/RLIMIT_RTPRIO resource limits.\n"
- "For enabling real-time/high-priority scheduling please acquire the appropriate PolicyKit privileges, or become a member of '%s', or increase the RLIMIT_NICE/RLIMIT_RTPRIO resource limits for this user."),
- PA_REALTIME_GROUP, PA_REALTIME_GROUP);
-
-
- if (!allow_realtime)
- conf->realtime_scheduling = FALSE;
-
- if (!allow_high_priority)
- conf->high_priority = FALSE;
- }
-
-#ifdef HAVE_SYS_RESOURCE_H
- /* Reset resource limits. If we are run as root (for system mode)
- * this might end up increasing the limits, which is intended
- * behaviour. For all other cases, i.e. started as normal user, or
- * SUID root at this point we should have no CAP_SYS_RESOURCE and
- * increasing the limits thus should fail. Which is, too, intended
- * behaviour */
-
- set_all_rlimits(conf);
-#endif
-
- if (conf->high_priority && !pa_can_high_priority()) {
- pa_log_info(_("High-priority scheduling enabled in configuration but not allowed by policy."));
- conf->high_priority = FALSE;
- }
-
- if (conf->high_priority && (conf->cmd == PA_CMD_DAEMON || conf->cmd == PA_CMD_START))
- pa_raise_priority(conf->nice_level);
-
- pa_log_debug("Can realtime: %s, can high-priority: %s", pa_yes_no(pa_can_realtime()), pa_yes_no(pa_can_high_priority()));
-
- if (!real_root && pa_have_caps()) {
- pa_bool_t drop;
-
- drop = (conf->cmd != PA_CMD_DAEMON && conf->cmd != PA_CMD_START) || !conf->realtime_scheduling;
-
-#ifdef RLIMIT_RTPRIO
- if (!drop) {
- struct rlimit rl;
- /* At this point we still have CAP_NICE if we were loaded
- * SUID root. If possible let's acquire RLIMIT_RTPRIO
- * instead and give CAP_NICE up. */
-
- if (getrlimit(RLIMIT_RTPRIO, &rl) >= 0) {
-
- if (rl.rlim_cur >= 9)
- drop = TRUE;
- else {
- rl.rlim_max = rl.rlim_cur = 9;
-
- if (setrlimit(RLIMIT_RTPRIO, &rl) >= 0) {
- pa_log_info(_("Successfully increased RLIMIT_RTPRIO"));
- drop = TRUE;
- } else
- pa_log_warn(_("RLIMIT_RTPRIO failed: %s"), pa_cstrerror(errno));
- }
- }
- }
-#endif
-
- if (drop) {
- pa_log_info(_("Giving up CAP_NICE"));
- pa_drop_caps();
- suid_root = FALSE;
- }
- }
-
- if (conf->realtime_scheduling && !pa_can_realtime()) {
- pa_log_info(_("Real-time scheduling enabled in configuration but not allowed by policy."));
- conf->realtime_scheduling = FALSE;
- }
-
- pa_log_debug("Can realtime: %s, can high-priority: %s", pa_yes_no(pa_can_realtime()), pa_yes_no(pa_can_high_priority()));
-
LTDL_SET_PRELOADED_SYMBOLS();
pa_ltdl_init();
ltdl_init = TRUE;
@@ -718,9 +545,9 @@ int main(int argc, char *argv[]) {
pa_assert(conf->cmd == PA_CMD_DAEMON || conf->cmd == PA_CMD_START);
}
- if (real_root && !conf->system_instance)
+ if (getuid() == 0 && !conf->system_instance)
pa_log_warn(_("This program is not intended to be run as root (unless --system is specified)."));
- else if (!real_root && conf->system_instance) {
+ else if (getuid() != 0 && conf->system_instance) {
pa_log(_("Root privileges required."));
goto finish;
}
@@ -866,6 +693,13 @@ int main(int argc, char *argv[]) {
pa_assert_se(chdir("/") == 0);
umask(0022);
+#ifdef HAVE_SYS_RESOURCE_H
+ set_all_rlimits(conf);
+#endif
+ pa_rtclock_hrtimer_enable();
+
+ pa_raise_priority(conf->nice_level);
+
if (conf->system_instance)
if (change_user() < 0)
goto finish;
@@ -914,8 +748,8 @@ int main(int argc, char *argv[]) {
pa_xfree(s);
if ((s = pa_session_id())) {
- pa_log_info(_("Session ID is %s."), s);
- pa_xfree(s);
+ pa_log_info(_("Session ID is %s."), s);
+ pa_xfree(s);
}
if (!(s = pa_get_runtime_dir()))
@@ -962,13 +796,6 @@ int main(int argc, char *argv[]) {
else
pa_log_info(_("Dude, your kernel stinks! The chef's recommendation today is Linux with high-resolution timers enabled!"));
- pa_rtclock_hrtimer_enable();
-
-#ifdef SIGRTMIN
- /* Valgrind uses SIGRTMAX. To easy debugging we don't use it here */
- pa_rtsig_configure(SIGRTMIN, SIGRTMAX-1);
-#endif
-
if (conf->lock_memory) {
#ifdef HAVE_SYS_MMAN_H
if (mlockall(MCL_FUTURE) < 0)
diff --git a/src/modules/alsa/alsa-mixer.c b/src/modules/alsa/alsa-mixer.c
index def26221..a5515e1b 100644
--- a/src/modules/alsa/alsa-mixer.c
+++ b/src/modules/alsa/alsa-mixer.c
@@ -479,6 +479,7 @@ static int element_get_volume(pa_alsa_element *e, snd_mixer_t *m, const pa_chann
snd_mixer_elem_t *me;
snd_mixer_selem_channel_id_t c;
pa_channel_position_mask_t mask = 0;
+ pa_volume_t max_channel_volume = PA_VOLUME_MUTED;
unsigned k;
pa_assert(m);
@@ -545,6 +546,9 @@ static int element_get_volume(pa_alsa_element *e, snd_mixer_t *m, const pa_chann
f = from_alsa_volume(value, e->min_volume, e->max_volume);
}
+ if (f > max_channel_volume)
+ max_channel_volume = f;
+
for (k = 0; k < cm->channels; k++)
if (e->masks[c][e->n_channels-1] & PA_CHANNEL_POSITION_MASK(cm->map[k]))
if (v->values[k] < f)
@@ -555,7 +559,7 @@ static int element_get_volume(pa_alsa_element *e, snd_mixer_t *m, const pa_chann
for (k = 0; k < cm->channels; k++)
if (!(mask & PA_CHANNEL_POSITION_MASK(cm->map[k])))
- v->values[k] = PA_VOLUME_NORM;
+ v->values[k] = max_channel_volume;
return 0;
}
@@ -677,6 +681,7 @@ static int element_set_volume(pa_alsa_element *e, snd_mixer_t *m, const pa_chann
snd_mixer_elem_t *me;
snd_mixer_selem_channel_id_t c;
pa_channel_position_mask_t mask = 0;
+ pa_volume_t max_channel_volume = PA_VOLUME_MUTED;
unsigned k;
pa_assert(m);
@@ -696,11 +701,21 @@ static int element_set_volume(pa_alsa_element *e, snd_mixer_t *m, const pa_chann
for (c = 0; c <= SND_MIXER_SCHN_LAST; c++) {
int r;
pa_volume_t f = PA_VOLUME_MUTED;
+ pa_bool_t found = FALSE;
for (k = 0; k < cm->channels; k++)
- if (e->masks[c][e->n_channels-1] & PA_CHANNEL_POSITION_MASK(cm->map[k]))
+ if (e->masks[c][e->n_channels-1] & PA_CHANNEL_POSITION_MASK(cm->map[k])) {
+ found = TRUE;
if (v->values[k] > f)
f = v->values[k];
+ }
+
+ if (!found) {
+ /* Hmm, so this channel does not exist in the volume
+ * struct, so let's bind it to the overall max of the
+ * volume. */
+ f = pa_cvolume_max(v);
+ }
if (e->has_dB) {
long value = to_alsa_dB(f);
@@ -756,6 +771,9 @@ static int element_set_volume(pa_alsa_element *e, snd_mixer_t *m, const pa_chann
f = from_alsa_volume(value, e->min_volume, e->max_volume);
}
+ if (f > max_channel_volume)
+ max_channel_volume = f;
+
for (k = 0; k < cm->channels; k++)
if (e->masks[c][e->n_channels-1] & PA_CHANNEL_POSITION_MASK(cm->map[k]))
if (rv.values[k] < f)
@@ -766,7 +784,7 @@ static int element_set_volume(pa_alsa_element *e, snd_mixer_t *m, const pa_chann
for (k = 0; k < cm->channels; k++)
if (!(mask & PA_CHANNEL_POSITION_MASK(cm->map[k])))
- rv.values[k] = PA_VOLUME_NORM;
+ rv.values[k] = max_channel_volume;
*v = rv;
return 0;
diff --git a/src/modules/alsa/alsa-sink.c b/src/modules/alsa/alsa-sink.c
index 34ff6582..c39a898f 100644
--- a/src/modules/alsa/alsa-sink.c
+++ b/src/modules/alsa/alsa-sink.c
@@ -838,7 +838,6 @@ static int unsuspend(struct userdata *u) {
pa_log_info("Trying resume...");
- snd_config_update_free_global();
if ((err = snd_pcm_open(&u->pcm_handle, u->device_name, SND_PCM_STREAM_PLAYBACK,
/*SND_PCM_NONBLOCK|*/
SND_PCM_NO_AUTO_RESAMPLE|
@@ -1213,7 +1212,6 @@ static void thread_func(void *userdata) {
pa_make_realtime(u->core->realtime_priority);
pa_thread_mq_install(&u->thread_mq);
- pa_rtpoll_install(u->rtpoll);
for (;;) {
int ret;
diff --git a/src/modules/alsa/alsa-source.c b/src/modules/alsa/alsa-source.c
index c8244c66..755ceae2 100644
--- a/src/modules/alsa/alsa-source.c
+++ b/src/modules/alsa/alsa-source.c
@@ -787,8 +787,6 @@ static int unsuspend(struct userdata *u) {
pa_log_info("Trying resume...");
- snd_config_update_free_global();
-
if ((err = snd_pcm_open(&u->pcm_handle, u->device_name, SND_PCM_STREAM_CAPTURE,
/*SND_PCM_NONBLOCK|*/
SND_PCM_NO_AUTO_RESAMPLE|
@@ -1096,7 +1094,6 @@ static void thread_func(void *userdata) {
pa_make_realtime(u->core->realtime_priority);
pa_thread_mq_install(&u->thread_mq);
- pa_rtpoll_install(u->rtpoll);
for (;;) {
int ret;
diff --git a/src/modules/alsa/alsa-util.c b/src/modules/alsa/alsa-util.c
index 0ed4361c..1f3e5dcd 100644
--- a/src/modules/alsa/alsa-util.c
+++ b/src/modules/alsa/alsa-util.c
@@ -735,20 +735,22 @@ static void alsa_error_handler(const char *file, int line, const char *function,
static pa_atomic_t n_error_handler_installed = PA_ATOMIC_INIT(0);
-void pa_alsa_redirect_errors_inc(void) {
+void pa_alsa_refcnt_inc(void) {
/* This is not really thread safe, but we do our best */
if (pa_atomic_inc(&n_error_handler_installed) == 0)
snd_lib_error_set_handler(alsa_error_handler);
}
-void pa_alsa_redirect_errors_dec(void) {
+void pa_alsa_refcnt_dec(void) {
int r;
pa_assert_se((r = pa_atomic_dec(&n_error_handler_installed)) >= 1);
- if (r == 1)
+ if (r == 1) {
snd_lib_error_set_handler(NULL);
+ snd_config_update_free_global();
+ }
}
pa_bool_t pa_alsa_init_description(pa_proplist *p) {
diff --git a/src/modules/alsa/alsa-util.h b/src/modules/alsa/alsa-util.h
index c2f0e5b7..830a922e 100644
--- a/src/modules/alsa/alsa-util.h
+++ b/src/modules/alsa/alsa-util.h
@@ -114,8 +114,8 @@ snd_pcm_t *pa_alsa_open_by_template(
void pa_alsa_dump(pa_log_level_t level, snd_pcm_t *pcm);
void pa_alsa_dump_status(snd_pcm_t *pcm);
-void pa_alsa_redirect_errors_inc(void);
-void pa_alsa_redirect_errors_dec(void);
+void pa_alsa_refcnt_inc(void);
+void pa_alsa_refcnt_dec(void);
void pa_alsa_init_proplist_pcm_info(pa_core *c, pa_proplist *p, snd_pcm_info_t *pcm_info);
void pa_alsa_init_proplist_card(pa_core *c, pa_proplist *p, int card);
diff --git a/src/modules/alsa/mixer/paths/analog-input-aux.conf b/src/modules/alsa/mixer/paths/analog-input-aux.conf
index 8f480567..db78eb48 100644
--- a/src/modules/alsa/mixer/paths/analog-input-aux.conf
+++ b/src/modules/alsa/mixer/paths/analog-input-aux.conf
@@ -1,4 +1,22 @@
-# For devices, where we have an Aux element
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; For devices where an 'Aux' element exists
+;
+; See analog-output.conf.common for an explanation on the directives
[General]
priority = 90
@@ -29,4 +47,16 @@ override-map.2 = all-left,all-right
switch = off
volume = off
+[Element Mic/Line]
+switch = off
+volume = off
+
+[Element TV Tuner]
+switch = off
+volume = off
+
+[Element FM]
+switch = off
+volume = off
+
.include analog-input.conf.common
diff --git a/src/modules/alsa/mixer/paths/analog-input-fm.conf b/src/modules/alsa/mixer/paths/analog-input-fm.conf
index 0f78f39f..baf674aa 100644
--- a/src/modules/alsa/mixer/paths/analog-input-fm.conf
+++ b/src/modules/alsa/mixer/paths/analog-input-fm.conf
@@ -1,4 +1,22 @@
-# For devices where we have an FM element
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; For devices where an 'FM' element exists
+;
+; See analog-output.conf.common for an explanation on the directives
[General]
priority = 70
diff --git a/src/modules/alsa/mixer/paths/analog-input-linein.conf b/src/modules/alsa/mixer/paths/analog-input-linein.conf
index b6ba738c..4be5722d 100644
--- a/src/modules/alsa/mixer/paths/analog-input-linein.conf
+++ b/src/modules/alsa/mixer/paths/analog-input-linein.conf
@@ -1,4 +1,22 @@
-# For devices, where we have a Line element
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; For devices where a 'Line' element exists
+;
+; See analog-output.conf.common for an explanation on the directives
[General]
priority = 90
diff --git a/src/modules/alsa/mixer/paths/analog-input-mic-line.conf b/src/modules/alsa/mixer/paths/analog-input-mic-line.conf
index 7d4addf7..f7f30854 100644
--- a/src/modules/alsa/mixer/paths/analog-input-mic-line.conf
+++ b/src/modules/alsa/mixer/paths/analog-input-mic-line.conf
@@ -1,4 +1,22 @@
-# For devices where we have a Mic/Lineb element
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; For devices where a 'Mic/Line' element exists
+;
+; See analog-output.conf.common for an explanation on the directives
[General]
priority = 90
@@ -42,3 +60,4 @@ switch = off
volume = off
.include analog-input.conf.common
+.include analog-input-mic.conf.common
diff --git a/src/modules/alsa/mixer/paths/analog-input-mic.conf b/src/modules/alsa/mixer/paths/analog-input-mic.conf
index 004cd24a..2a36f2f3 100644
--- a/src/modules/alsa/mixer/paths/analog-input-mic.conf
+++ b/src/modules/alsa/mixer/paths/analog-input-mic.conf
@@ -1,4 +1,22 @@
-# For devices where we have a Mic element
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; For devices where a 'Mic' element exists
+;
+; See analog-output.conf.common for an explanation on the directives
[General]
priority = 100
diff --git a/src/modules/alsa/mixer/paths/analog-input-mic.conf.common b/src/modules/alsa/mixer/paths/analog-input-mic.conf.common
index db70e507..b35e7af8 100644
--- a/src/modules/alsa/mixer/paths/analog-input-mic.conf.common
+++ b/src/modules/alsa/mixer/paths/analog-input-mic.conf.common
@@ -1,3 +1,23 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Common element for all microphone inputs
+;
+; See analog-output.conf.common for an explanation on the directives
+
;;; 'Mic Select'
[Element Mic Select]
diff --git a/src/modules/alsa/mixer/paths/analog-input-tvtuner.conf b/src/modules/alsa/mixer/paths/analog-input-tvtuner.conf
index ea0a0b72..8531ec70 100644
--- a/src/modules/alsa/mixer/paths/analog-input-tvtuner.conf
+++ b/src/modules/alsa/mixer/paths/analog-input-tvtuner.conf
@@ -1,4 +1,22 @@
-# For devices, where we have a TV Tuner element
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; For devices where a 'TV Tuner' element exists
+;
+; See analog-output.conf.common for an explanation on the directives
[General]
priority = 70
diff --git a/src/modules/alsa/mixer/paths/analog-input-video.conf b/src/modules/alsa/mixer/paths/analog-input-video.conf
index 27acc254..74c76f07 100644
--- a/src/modules/alsa/mixer/paths/analog-input-video.conf
+++ b/src/modules/alsa/mixer/paths/analog-input-video.conf
@@ -1,4 +1,22 @@
-# For devices, where we have a Video element
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; For devices where a 'Video' element exists
+;
+; See analog-output.conf.common for an explanation on the directives
[General]
priority = 70
@@ -28,4 +46,16 @@ volume = merge
override-map.1 = all
override-map.2 = all-left,all-right
+[Element Mic/Line]
+switch = off
+volume = off
+
+[Element TV Tuner]
+switch = off
+volume = off
+
+[Element FM]
+switch = off
+volume = off
+
.include analog-input.conf.common
diff --git a/src/modules/alsa/mixer/paths/analog-input.conf b/src/modules/alsa/mixer/paths/analog-input.conf
index b221bb44..5055f90a 100644
--- a/src/modules/alsa/mixer/paths/analog-input.conf
+++ b/src/modules/alsa/mixer/paths/analog-input.conf
@@ -1,4 +1,23 @@
-# A fallback for devices that lack seperate Mic/Line/Aux/Video elements
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; A fallback for devices that lack seperate Mic/Line/Aux/Video/TV
+; Tuner/FM elements
+;
+; See analog-output.conf.common for an explanation on the directives
[General]
priority = 100
diff --git a/src/modules/alsa/mixer/paths/analog-input.conf.common b/src/modules/alsa/mixer/paths/analog-input.conf.common
index d34afd04..6728a6ae 100644
--- a/src/modules/alsa/mixer/paths/analog-input.conf.common
+++ b/src/modules/alsa/mixer/paths/analog-input.conf.common
@@ -1,30 +1,48 @@
-# Mixer path for PulseAudio's ALSA backend. If multiple options by the
-# same id are discovered they will be suffixed with a number to
-# distuingish them, in the same order they appear here.
+# This file is part of PulseAudio.
#
-# Source selection should use the following names:
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
#
-# input -- If we don't know the exact kind of input
-# input-microphone
-# input-microphone-internal
-# input-microphone-external
-# input-linein
-# input-video
-# input-radio
-# input-docking-microphone
-# input-docking-linein
-# input-docking
-#
-# We explicitly don't want to wrap the following sources:
-#
-# CD
-# Synth/MIDI
-# Phone
-# Mix
-# Digital/SPDIF
-# Master
-# PC Speaker
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Mixer path for PulseAudio's ALSA backend, common elements for all
+; input paths. If multiple options by the same id are discovered they
+; will be suffixed with a number to distuingish them, in the same
+; order they appear here.
+;
+; Source selection should use the following names:
+;
+; input -- If we don't know the exact kind of input
+; input-microphone
+; input-microphone-internal
+; input-microphone-external
+; input-linein
+; input-video
+; input-radio
+; input-docking-microphone
+; input-docking-linein
+; input-docking
+;
+; We explicitly don't want to wrap the following sources:
+;
+; CD
+; Synth/MIDI
+; Phone
+; Mix
+; Digital/SPDIF
+; Master
+; PC Speaker
+;
+; See analog-output.conf.common for an explanation on the directives
;;; 'Input Source Select'
diff --git a/src/modules/alsa/mixer/paths/analog-output-headphones.conf b/src/modules/alsa/mixer/paths/analog-output-headphones.conf
index 1a172d4c..c018e0eb 100644
--- a/src/modules/alsa/mixer/paths/analog-output-headphones.conf
+++ b/src/modules/alsa/mixer/paths/analog-output-headphones.conf
@@ -1,4 +1,22 @@
-# Path for mixers that have a Headphone slider
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Path for mixers that have a 'Headphone' control
+;
+; See analog-output.conf.common for an explanation on the directives
[General]
priority = 90
diff --git a/src/modules/alsa/mixer/paths/analog-output-lfe-on-mono.conf b/src/modules/alsa/mixer/paths/analog-output-lfe-on-mono.conf
index 67031762..7a267890 100644
--- a/src/modules/alsa/mixer/paths/analog-output-lfe-on-mono.conf
+++ b/src/modules/alsa/mixer/paths/analog-output-lfe-on-mono.conf
@@ -1,5 +1,23 @@
-# Intended for usage in laptops that have a seperate LFE speaker
-# connected to the Master mono connector
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Intended for usage in laptops that have a seperate LFE speaker
+; connected to the Master mono connector
+;
+; See analog-output.conf.common for an explanation on the directives
[General]
priority = 40
diff --git a/src/modules/alsa/mixer/paths/analog-output-mono.conf b/src/modules/alsa/mixer/paths/analog-output-mono.conf
index a23d9b79..f6cb9f8a 100644
--- a/src/modules/alsa/mixer/paths/analog-output-mono.conf
+++ b/src/modules/alsa/mixer/paths/analog-output-mono.conf
@@ -1,4 +1,22 @@
-# Intended for usage on boards that have a seperate Mono output plug.
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Intended for usage on boards that have a seperate Mono output plug.
+;
+; See analog-output.conf.common for an explanation on the directives
[General]
priority = 50
diff --git a/src/modules/alsa/mixer/paths/analog-output.conf b/src/modules/alsa/mixer/paths/analog-output.conf
index 15e703c4..ea108aaf 100644
--- a/src/modules/alsa/mixer/paths/analog-output.conf
+++ b/src/modules/alsa/mixer/paths/analog-output.conf
@@ -1,4 +1,22 @@
-# Intended for the 'default' output
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Intended for the 'default' output
+;
+; See analog-output.conf.common for an explanation on the directives
[General]
priority = 100
diff --git a/src/modules/alsa/mixer/paths/analog-output.conf.common b/src/modules/alsa/mixer/paths/analog-output.conf.common
index c38eccde..cc1185f4 100644
--- a/src/modules/alsa/mixer/paths/analog-output.conf.common
+++ b/src/modules/alsa/mixer/paths/analog-output.conf.common
@@ -1,26 +1,97 @@
-# Common part of all paths
-
-# [General]
-# priority = ...
-# description = ...
-#
-# [Option ...:...]
-# name = ...
-# priority = ...
+# This file is part of PulseAudio.
#
-# [Element ...]
-# required = ignore | switch | volume | enumeration | any
-# required-absent = ignore | switch | volume
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
#
-# switch = ignore | mute | off | on | select
-# volume = ignore | merge | off | zero
-# enumeration = ignore | select
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
#
-# direction = playback | capture
-# direction-try-other = no | yes
-#
-# override-map.1 = ...
-# override-map.2 = ...
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Common part of all paths
+
+; So here's generally how mixer paths are used by PA: PA goes through
+; a mixer path file from top to bottom and checks if a mixer element
+; described therein exists. If so it is added to the list of mixer
+; elements PA will control, keeping the order it read them in. If a
+; mixer element described here has set the required= or
+; required-absent= directives a path might not be accepted as valid
+; and is ignored in its entirety (see below). However usually if a
+; element listed here is missing this one element is ignored but not
+; the entire path.
+;
+; When a device shall be muted/unmuted *all* elements listed in a path
+; file with "switch = mute" will be toggled.
+;
+; When a device shall change its volume, PA will got through the list
+; of all elements with "volume = merge" and set the volume on the
+; first element. If that element does not support dB volumes, this is
+; where the story ends. If it does support dB volumes, PA divides the
+; requested volume by the volume that was set on this element, and
+; then go on to the next element with "volume = merge" and then set
+; that there, and so on. That way the first volume element in the
+; path will be the one that does the 'biggest' part of the overall
+; volume adjustment, with the remaining elements usually being set to
+; some value next to 0dB. This logic makes sure we get the full range
+; over all volume sliders and a very high granularity of volumes
+; already in hardware.
+;
+; All switches and enumerations set to "select" are exposed via the
+; "port" functionality of sinks/sources. Basically every possible
+; switch setting and every possible enumeration setting will be
+; combined and made into a "port". So make sure you don't list too
+; many switches/enums for exposing, because the number of ports might
+; rise exponentially.
+;
+; Only one path can be selected at a time. All paths that are valid
+; for an audio device will be exposed as "port" for the sink/source.
+
+
+; [General]
+; priority = ... # Priority for this path
+; description = ...
+;
+; [Option ...:...] # For each option of an enumeration or switch element
+; # that shall be exposed as a sink/source port. Needs to
+; # be named after the Element, followed by a colon, followed
+; # by the option name, resp. on/off if the element is a switch.
+; name = ... # Logical name to use in the path identifier
+; priority = ... # Priority if this is made into a device port
+;
+; [Element ...] # For each element that we shall control
+; required = ignore | switch | volume | enumeration | any # If set, require this element to be of this kind and available,
+; # otherwise don't consider this path valid for the card
+; required-absent = ignore | switch | volume # If set, require this element to not be of this kind and not
+; # available, otherwise don't consider this path valid for the card
+;
+; switch = ignore | mute | off | on | select # What to do with this switch: ignore it, make it follow mute status,
+; # always set it to off, always to on, or make it selectable as port.
+; # If set to 'select' you need to define an Option section for on
+; # and off
+; volume = ignore | merge | off | zero # What to do with this volume: ignore it, merge it into the device
+; # volume slider, always set it to the lowest value possible, or always
+; # set it to 0 dB (for whatever that means)
+; enumeration = ignore | select # What to do with this enumeration, ignore it or make it selectable
+; # via device ports. If set to 'select' you need to define an Option section
+; # for each of the items you want to expose
+; direction = playback | capture # Is this relevant only for playback or capture? If not set this will implicitly be
+; # set the direction of the PCM device is opened as. Generally this doesn't need to be set
+; # unless you have a broken driver that has playback controls marked for capture or vice
+; # versa
+; direction-try-other = no | yes # If the element does not supported what is requested, try the other direction, too?
+;
+; override-map.1 = ... # Override the channel mask of the mixer control if the control only exposes a single channel
+; override-map.2 = ... # Override the channel masks of the mixer control if the control only exposes two channels
+; # Override maps should list for each element channel which high-level channels it controls via a
+; # channel mask. A channel mask may either be the name of a single channel, or the words "all-left",
+; # "all-right", "all-center", "all-front", "all-rear", and "all" to encode a specific subset of
+; # channels in a mask
[Element PCM]
switch = mute
diff --git a/src/modules/alsa/mixer/profile-sets/78-pulseaudio.rules b/src/modules/alsa/mixer/profile-sets/78-pulseaudio.rules
deleted file mode 100644
index 92a6b034..00000000
--- a/src/modules/alsa/mixer/profile-sets/78-pulseaudio.rules
+++ /dev/null
@@ -1,9 +0,0 @@
-# do not edit this file, it will be overwritten on update
-
-SUBSYSTEM!="sound", GOTO="pulseaudio_end"
-ACTION!="change", GOTO="pulseaudio_end"
-KERNEL!="card*", GOTO="pulseaudio_end"
-
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1978", ENV{PULSE_PROFILE_SET}="native-instruments-audio8dj.conf"
-
-LABEL="pulseaudio_end"
diff --git a/src/modules/alsa/mixer/profile-sets/90-pulseaudio.rules b/src/modules/alsa/mixer/profile-sets/90-pulseaudio.rules
new file mode 100644
index 00000000..ea1a2fed
--- /dev/null
+++ b/src/modules/alsa/mixer/profile-sets/90-pulseaudio.rules
@@ -0,0 +1,26 @@
+# do not edit this file, it will be overwritten on update
+
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+SUBSYSTEM!="sound", GOTO="pulseaudio_end"
+ACTION!="change", GOTO="pulseaudio_end"
+KERNEL!="card*", GOTO="pulseaudio_end"
+
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1978", ENV{PULSE_PROFILE_SET}="native-instruments-audio8dj.conf"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="0839", ENV{PULSE_PROFILE_SET}="native-instruments-audio4dj.conf"
+
+LABEL="pulseaudio_end"
diff --git a/src/modules/alsa/mixer/profile-sets/default.conf b/src/modules/alsa/mixer/profile-sets/default.conf
index bbe53410..ac41a8d3 100644
--- a/src/modules/alsa/mixer/profile-sets/default.conf
+++ b/src/modules/alsa/mixer/profile-sets/default.conf
@@ -1,22 +1,60 @@
-# Profile definitions for PulseAudio's ALSA backend
+# This file is part of PulseAudio.
#
-# [Mapping id]
-# device-strings = ...
-# channel-map = ...
-# description = ...
-# paths-input = ...
-# paths-output = ...
-# element-input = ...
-# element-output = ...
-# priority = ...
-# direction = any | input | output
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
#
-# [Profile id]
-# input-mappings = ...
-# output-mappings = ...
-# description = ...
-# priority = ...
-# skip-probe = no | yes
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Default profile definitions for the ALSA backend of PulseAudio. This
+; is used as fallback for all cards that have no special mapping
+; assigned. (and should be good enough for the vast majority of
+; cards). Use the udev property PULSE_PROFILE_SET to assign a
+; different profile set than this one to a device. So what is this
+; about? Simply, what we do here is map ALSA devices to how they are
+; exposed in PA. We say which ALSA device string to use to open a
+; device, which channel mapping to use then, and which mixer path to
+; use. This is encoded in a 'mapping'. Multiple of these mappings can
+; be bound together in a 'profile' which is then directly exposed in
+; the UI as a card profile. Each mapping assigned to a profile will
+; result in one sink/source to be created if the profile is selected
+; for the card.
+
+; [General]
+; auto-profiles = no | yes # Instead of defining all profiles manually, autogenerate
+; # them by combining every input mapping with every output mapping.
+;
+; [Mapping id]
+; device-strings = ... # ALSA device string. %f will be replaced by the card identifier.
+; channel-map = ... # Channel mapping to use for this device
+; description = ...
+; paths-input = ... # A list of mixer paths to use. Every path in this list will be probed.
+; # If multiple are found to be working they will be available as device ports
+; paths-output = ...
+; element-input = ... # Instead of configuring a full mixer path simply configure a single
+; # mixer element for volume/mute handling
+; element-output = ...
+; priority = ...
+; direction = any | input | output # Only useful for?
+;
+; [Profile id]
+; input-mappings = ... # Lists mappings for sources on this profile, those mapping must be
+; # defined in this file too
+; output-mappings = ... # Lists mappings for sinks on this profile, those mappings must be
+; # defined in this file too
+; description = ...
+; priority = ... # Numeric value to deduce priority for this profile
+; skip-probe = no | yes # Skip probing for availability? If this is yes then this profile
+; # will be assumed as working without probing. Makes initialization
+; # a bit faster but only works if the card is really known well.
[General]
auto-profiles = yes
@@ -99,6 +137,7 @@ channel-map = left,right
priority = 4
direction = output
+; An example for defining multiple-sink profiles
#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo]
#description = Foobar
#output-mappings = analog-stereo iec958-stereo
diff --git a/src/modules/alsa/mixer/profile-sets/native-instruments-audio4dj.conf b/src/modules/alsa/mixer/profile-sets/native-instruments-audio4dj.conf
new file mode 100644
index 00000000..2b835308
--- /dev/null
+++ b/src/modules/alsa/mixer/profile-sets/native-instruments-audio4dj.conf
@@ -0,0 +1,91 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Native Instruments Audio 4 DJ
+;
+; This card has two stereo pairs of input and two stereo pairs of
+; output, named channels A and B. Channel B has an additional
+; Headphone connector.
+;
+; We knowingly only define a subset of the theoretically possible
+; mapping combinations as profiles here.
+;
+; See default.conf for an explanation on the directives used here.
+
+[General]
+auto-profiles = no
+
+[Mapping analog-stereo-a]
+description = Analog Stereo Channel A
+device-strings = hw:%f,0,0
+channel-map = left,right
+
+[Mapping analog-stereo-b-output]
+description = Analog Stereo Channel B (Headphones)
+device-strings = hw:%f,0,1
+channel-map = left,right
+direction = output
+
+[Mapping analog-stereo-b-input]
+description = Analog Stereo Channel B
+device-strings = hw:%f,0,1
+channel-map = left,right
+direction = input
+
+[Profile output:analog-stereo-all+input:analog-stereo-all]
+description = Analog Stereo Duplex Channels A, B (Headphones)
+output-mappings = analog-stereo-a analog-stereo-b-output
+input-mappings = analog-stereo-a analog-stereo-b-input
+priority = 100
+skip-probe = yes
+
+[Profile output:analog-stereo-a+input:analog-stereo-a]
+description = Analog Stereo Duplex Channel A
+output-mappings = analog-stereo-a
+input-mappings = analog-stereo-a
+priority = 40
+skip-probe = yes
+
+[Profile output:analog-stereo-b+input:analog-stereo-b]
+description = Analog Stereo Duplex Channel B (Headphones)
+output-mappings = analog-stereo-b-output
+input-mappings = analog-stereo-b-input
+priority = 50
+skip-probe = yes
+
+[Profile output:analog-stereo-a]
+description = Analog Stereo Output Channel A
+output-mappings = analog-stereo-a
+priority = 5
+skip-probe = yes
+
+[Profile output:analog-stereo-b]
+description = Analog Stereo Output Channel B (Headphones)
+output-mappings = analog-stereo-b-output
+priority = 6
+skip-probe = yes
+
+[Profile input:analog-stereo-a]
+description = Analog Stereo Input Channel A
+input-mappings = analog-stereo-a
+priority = 2
+skip-probe = yes
+
+[Profile input:analog-stereo-b]
+description = Analog Stereo Input Channel B
+input-mappings = analog-stereo-b-input
+priority = 1
+skip-probe = yes
diff --git a/src/modules/alsa/mixer/profile-sets/native-instruments-audio8dj.conf b/src/modules/alsa/mixer/profile-sets/native-instruments-audio8dj.conf
index fe1e9ae8..3fe3cc56 100644
--- a/src/modules/alsa/mixer/profile-sets/native-instruments-audio8dj.conf
+++ b/src/modules/alsa/mixer/profile-sets/native-instruments-audio8dj.conf
@@ -22,6 +22,8 @@
;
; We knowingly only define a subset of the theoretically possible
; mapping combinations as profiles here.
+;
+; See default.conf for an explanation on the directives used here.
[General]
auto-profiles = no
diff --git a/src/modules/alsa/module-alsa-card.c b/src/modules/alsa/module-alsa-card.c
index e8a7f206..55f6a6e2 100644
--- a/src/modules/alsa/module-alsa-card.c
+++ b/src/modules/alsa/module-alsa-card.c
@@ -287,8 +287,7 @@ int pa__init(pa_module *m) {
const char *description;
char *fn = NULL;
- pa_alsa_redirect_errors_inc();
- snd_config_update_free_global();
+ pa_alsa_refcnt_inc();
pa_assert(m);
@@ -443,6 +442,5 @@ void pa__done(pa_module*m) {
pa_xfree(u);
finish:
- snd_config_update_free_global();
- pa_alsa_redirect_errors_dec();
+ pa_alsa_refcnt_dec();
}
diff --git a/src/modules/alsa/module-alsa-sink.c b/src/modules/alsa/module-alsa-sink.c
index 058ea205..3aa89b2a 100644
--- a/src/modules/alsa/module-alsa-sink.c
+++ b/src/modules/alsa/module-alsa-sink.c
@@ -82,8 +82,7 @@ int pa__init(pa_module*m) {
pa_assert(m);
- pa_alsa_redirect_errors_inc();
- snd_config_update_free_global();
+ pa_alsa_refcnt_inc();
if (!(ma = pa_modargs_new(m->argument, valid_modargs))) {
pa_log("Failed to parse module arguments");
@@ -124,6 +123,5 @@ void pa__done(pa_module*m) {
if ((sink = m->userdata))
pa_alsa_sink_free(sink);
- snd_config_update_free_global();
- pa_alsa_redirect_errors_dec();
+ pa_alsa_refcnt_dec();
}
diff --git a/src/modules/alsa/module-alsa-source.c b/src/modules/alsa/module-alsa-source.c
index 3bd1b451..de8bcd0b 100644
--- a/src/modules/alsa/module-alsa-source.c
+++ b/src/modules/alsa/module-alsa-source.c
@@ -106,8 +106,7 @@ int pa__init(pa_module*m) {
pa_assert(m);
- pa_alsa_redirect_errors_inc();
- snd_config_update_free_global();
+ pa_alsa_refcnt_inc();
if (!(ma = pa_modargs_new(m->argument, valid_modargs))) {
pa_log("Failed to parse module arguments");
@@ -148,6 +147,5 @@ void pa__done(pa_module*m) {
if ((source = m->userdata))
pa_alsa_source_free(source);
- snd_config_update_free_global();
- pa_alsa_redirect_errors_dec();
+ pa_alsa_refcnt_dec();
}
diff --git a/src/modules/bluetooth/module-bluetooth-device.c b/src/modules/bluetooth/module-bluetooth-device.c
index 6bcd0b80..0f1e78f2 100644
--- a/src/modules/bluetooth/module-bluetooth-device.c
+++ b/src/modules/bluetooth/module-bluetooth-device.c
@@ -1265,7 +1265,6 @@ static void thread_func(void *userdata) {
goto fail;
pa_thread_mq_install(&u->thread_mq);
- pa_rtpoll_install(u->rtpoll);
for (;;) {
struct pollfd *pollfd;
diff --git a/src/modules/jack/module-jack-sink.c b/src/modules/jack/module-jack-sink.c
index 290038e7..fc976fa7 100644
--- a/src/modules/jack/module-jack-sink.c
+++ b/src/modules/jack/module-jack-sink.c
@@ -225,7 +225,6 @@ static void thread_func(void *userdata) {
pa_make_realtime(u->core->realtime_priority);
pa_thread_mq_install(&u->thread_mq);
- pa_rtpoll_install(u->rtpoll);
for (;;) {
int ret;
diff --git a/src/modules/jack/module-jack-source.c b/src/modules/jack/module-jack-source.c
index ef89a98e..a898e0e5 100644
--- a/src/modules/jack/module-jack-source.c
+++ b/src/modules/jack/module-jack-source.c
@@ -196,7 +196,6 @@ static void thread_func(void *userdata) {
pa_make_realtime(u->core->realtime_priority);
pa_thread_mq_install(&u->thread_mq);
- pa_rtpoll_install(u->rtpoll);
for (;;) {
int ret;
diff --git a/src/modules/module-combine.c b/src/modules/module-combine.c
index 725faa0c..cd3118d7 100644
--- a/src/modules/module-combine.c
+++ b/src/modules/module-combine.c
@@ -280,7 +280,6 @@ static void thread_func(void *userdata) {
pa_make_realtime(u->core->realtime_priority+1);
pa_thread_mq_install(&u->thread_mq);
- pa_rtpoll_install(u->rtpoll);
u->thread_info.timestamp = pa_rtclock_usec();
u->thread_info.in_null_mode = FALSE;
diff --git a/src/modules/module-esound-sink.c b/src/modules/module-esound-sink.c
index 8cb25c51..48a9c794 100644
--- a/src/modules/module-esound-sink.c
+++ b/src/modules/module-esound-sink.c
@@ -200,7 +200,6 @@ static void thread_func(void *userdata) {
pa_log_debug("Thread starting up");
pa_thread_mq_install(&u->thread_mq);
- pa_rtpoll_install(u->rtpoll);
pa_smoother_set_time_offset(u->smoother, pa_rtclock_usec());
diff --git a/src/modules/module-null-sink.c b/src/modules/module-null-sink.c
index 30a99ca7..c4753c9d 100644
--- a/src/modules/module-null-sink.c
+++ b/src/modules/module-null-sink.c
@@ -208,7 +208,6 @@ static void thread_func(void *userdata) {
pa_log_debug("Thread starting up");
pa_thread_mq_install(&u->thread_mq);
- pa_rtpoll_install(u->rtpoll);
u->timestamp = pa_rtclock_usec();
diff --git a/src/modules/module-pipe-sink.c b/src/modules/module-pipe-sink.c
index 5b0f6414..8a7dc846 100644
--- a/src/modules/module-pipe-sink.c
+++ b/src/modules/module-pipe-sink.c
@@ -170,7 +170,6 @@ static void thread_func(void *userdata) {
pa_log_debug("Thread starting up");
pa_thread_mq_install(&u->thread_mq);
- pa_rtpoll_install(u->rtpoll);
for (;;) {
struct pollfd *pollfd;
diff --git a/src/modules/module-pipe-source.c b/src/modules/module-pipe-source.c
index 61c9fc0e..e5609fb5 100644
--- a/src/modules/module-pipe-source.c
+++ b/src/modules/module-pipe-source.c
@@ -129,7 +129,6 @@ static void thread_func(void *userdata) {
pa_log_debug("Thread starting up");
pa_thread_mq_install(&u->thread_mq);
- pa_rtpoll_install(u->rtpoll);
for (;;) {
int ret;
diff --git a/src/modules/module-sine-source.c b/src/modules/module-sine-source.c
index 14a04e47..8df4d9bb 100644
--- a/src/modules/module-sine-source.c
+++ b/src/modules/module-sine-source.c
@@ -166,7 +166,6 @@ static void thread_func(void *userdata) {
pa_log_debug("Thread starting up");
pa_thread_mq_install(&u->thread_mq);
- pa_rtpoll_install(u->rtpoll);
u->timestamp = pa_rtclock_usec();
diff --git a/src/modules/module-tunnel.c b/src/modules/module-tunnel.c
index c493d9bb..eaed5f9a 100644
--- a/src/modules/module-tunnel.c
+++ b/src/modules/module-tunnel.c
@@ -683,7 +683,6 @@ static void thread_func(void *userdata) {
pa_log_debug("Thread starting up");
pa_thread_mq_install(&u->thread_mq);
- pa_rtpoll_install(u->rtpoll);
for (;;) {
int ret;
diff --git a/src/modules/oss/module-oss.c b/src/modules/oss/module-oss.c
index b1afcfd6..c44b882b 100644
--- a/src/modules/oss/module-oss.c
+++ b/src/modules/oss/module-oss.c
@@ -889,7 +889,6 @@ static void thread_func(void *userdata) {
pa_make_realtime(u->core->realtime_priority);
pa_thread_mq_install(&u->thread_mq);
- pa_rtpoll_install(u->rtpoll);
for (;;) {
int ret;
diff --git a/src/modules/raop/module-raop-sink.c b/src/modules/raop/module-raop-sink.c
index 54de42c2..cab3a82a 100644
--- a/src/modules/raop/module-raop-sink.c
+++ b/src/modules/raop/module-raop-sink.c
@@ -323,7 +323,6 @@ static void thread_func(void *userdata) {
pa_log_debug("Thread starting up");
pa_thread_mq_install(&u->thread_mq);
- pa_rtpoll_install(u->rtpoll);
pa_smoother_set_time_offset(u->smoother, pa_rtclock_usec());
diff --git a/src/pulsecore/core-util.c b/src/pulsecore/core-util.c
index a71ba0b0..4550344f 100644
--- a/src/pulsecore/core-util.c
+++ b/src/pulsecore/core-util.c
@@ -50,6 +50,10 @@
#ifdef HAVE_SCHED_H
#include <sched.h>
+
+#if defined(__linux__) && !defined(SCHED_RESET_ON_FORK)
+#define SCHED_RESET_ON_FORK 0x40000000
+#endif
#endif
#ifdef HAVE_SYS_RESOURCE_H
@@ -92,6 +96,10 @@
#include <xlocale.h>
#endif
+#ifdef HAVE_DBUS
+#include "rtkit.h"
+#endif
+
#include <pulse/xmalloc.h>
#include <pulse/util.h>
#include <pulse/utf8.h>
@@ -552,127 +560,121 @@ char *pa_strlcpy(char *b, const char *s, size_t l) {
return b;
}
-/* Make the current thread a realtime thread, and acquire the highest
- * rtprio we can get that is less or equal the specified parameter. If
- * the thread is already realtime, don't do anything. */
-int pa_make_realtime(int rtprio) {
-
-#ifdef _POSIX_PRIORITY_SCHEDULING
+static int set_scheduler(int rtprio) {
struct sched_param sp;
- int r, policy;
+ int r;
+#ifdef HAVE_DBUS
+ DBusError error;
+ DBusConnection *bus;
- memset(&sp, 0, sizeof(sp));
- policy = 0;
+ dbus_error_init(&error);
+#endif
- if ((r = pthread_getschedparam(pthread_self(), &policy, &sp)) != 0) {
- pa_log("pthread_getschedgetparam(): %s", pa_cstrerror(r));
- return -1;
+ pa_zero(sp);
+ sp.sched_priority = rtprio;
+
+#ifdef SCHED_RESET_ON_FORK
+ if ((r = pthread_setschedparam(pthread_self(), SCHED_RR|SCHED_RESET_ON_FORK, &sp)) == 0) {
+ pa_log_debug("SCHED_RR|SCHED_RESET_ON_FORK worked.");
+ return 0;
}
+#endif
- if (policy == SCHED_FIFO && sp.sched_priority >= rtprio) {
- pa_log_info("Thread already being scheduled with SCHED_FIFO with priority %i.", sp.sched_priority);
+ if ((r = pthread_setschedparam(pthread_self(), SCHED_RR, &sp)) == 0) {
+ pa_log_debug("SCHED_RR worked.");
return 0;
}
- sp.sched_priority = rtprio;
- if ((r = pthread_setschedparam(pthread_self(), SCHED_FIFO, &sp)) != 0) {
+#ifdef HAVE_DBUS
+ /* Try to talk to RealtimeKit */
- while (sp.sched_priority > 1) {
- sp.sched_priority --;
+ if (!(bus = dbus_bus_get(DBUS_BUS_SYSTEM, &error))) {
+ pa_log("Failed to connect to system bus: %s\n", error.message);
+ dbus_error_free(&error);
+ errno = -EIO;
+ return -1;
+ }
- if ((r = pthread_setschedparam(pthread_self(), SCHED_FIFO, &sp)) == 0) {
- pa_log_info("Successfully enabled SCHED_FIFO scheduling for thread, with priority %i, which is lower than the requested %i.", sp.sched_priority, rtprio);
- return 0;
- }
- }
+ r = rtkit_make_realtime(bus, 0, rtprio);
+ dbus_connection_unref(bus);
- pa_log_warn("pthread_setschedparam(): %s", pa_cstrerror(r));
- return -1;
+ if (r >= 0) {
+ pa_log_debug("RealtimeKit worked.");
+ return 0;
}
- pa_log_info("Successfully enabled SCHED_FIFO scheduling for thread, with priority %i.", sp.sched_priority);
- return 0;
+ errno = -r;
#else
+ errno = r;
+#endif
- errno = ENOTSUP;
return -1;
-#endif
}
-/* This is merely used for giving the user a hint. This is not correct
- * for anything security related */
-pa_bool_t pa_can_realtime(void) {
-
- if (geteuid() == 0)
- return TRUE;
+/* Make the current thread a realtime thread, and acquire the highest
+ * rtprio we can get that is less or equal the specified parameter. If
+ * the thread is already realtime, don't do anything. */
+int pa_make_realtime(int rtprio) {
-#if defined(HAVE_SYS_RESOURCE_H) && defined(RLIMIT_RTPRIO)
- {
- struct rlimit rl;
+#ifdef _POSIX_PRIORITY_SCHEDULING
+ int p;
- if (getrlimit(RLIMIT_RTPRIO, &rl) >= 0)
- if (rl.rlim_cur > 0 || rl.rlim_cur == RLIM_INFINITY)
- return TRUE;
+ if (set_scheduler(rtprio) >= 0) {
+ pa_log_info("Successfully enabled SCHED_RR scheduling for thread, with priority %i.", rtprio);
+ return 0;
}
-#endif
-#if defined(HAVE_SYS_CAPABILITY_H) && defined(CAP_SYS_NICE)
- {
- cap_t cap;
-
- if ((cap = cap_get_proc())) {
- cap_flag_value_t flag = CAP_CLEAR;
+ for (p = rtprio-1; p >= 1; p--)
+ if (set_scheduler(p)) {
+ pa_log_info("Successfully enabled SCHED_RR scheduling for thread, with priority %i, which is lower than the requested %i.", p, rtprio);
+ return 0;
+ }
- if (cap_get_flag(cap, CAP_SYS_NICE, CAP_EFFECTIVE, &flag) >= 0)
- if (flag == CAP_SET) {
- cap_free(cap);
- return TRUE;
- }
+ pa_log_info("Failed to acquire real-time scheduling: %s", pa_cstrerror(errno));
+ return -1;
+#else
- cap_free(cap);
- }
- }
+ errno = ENOTSUP;
+ return -1;
#endif
-
- return FALSE;
}
-/* This is merely used for giving the user a hint. This is not correct
- * for anything security related */
-pa_bool_t pa_can_high_priority(void) {
-
- if (geteuid() == 0)
- return TRUE;
+static int set_nice(int nice_level) {
+#ifdef HAVE_DBUS
+ DBusError error;
+ DBusConnection *bus;
+ int r;
-#if defined(HAVE_SYS_RESOURCE_H) && defined(RLIMIT_RTPRIO)
- {
- struct rlimit rl;
+ dbus_error_init(&error);
+#endif
- if (getrlimit(RLIMIT_NICE, &rl) >= 0)
- if (rl.rlim_cur >= 21 || rl.rlim_cur == RLIM_INFINITY)
- return TRUE;
+ if (setpriority(PRIO_PROCESS, 0, nice_level) >= 0) {
+ pa_log_debug("setpriority() worked.");
+ return 0;
}
-#endif
-#if defined(HAVE_SYS_CAPABILITY_H) && defined(CAP_SYS_NICE)
- {
- cap_t cap;
+#ifdef HAVE_DBUS
+ /* Try to talk to RealtimeKit */
- if ((cap = cap_get_proc())) {
- cap_flag_value_t flag = CAP_CLEAR;
+ if (!(bus = dbus_bus_get(DBUS_BUS_SYSTEM, &error))) {
+ pa_log("Failed to connect to system bus: %s\n", error.message);
+ dbus_error_free(&error);
+ errno = -EIO;
+ return -1;
+ }
- if (cap_get_flag(cap, CAP_SYS_NICE, CAP_EFFECTIVE, &flag) >= 0)
- if (flag == CAP_SET) {
- cap_free(cap);
- return TRUE;
- }
+ r = rtkit_make_high_priority(bus, 0, nice_level);
+ dbus_connection_unref(bus);
- cap_free(cap);
- }
+ if (r >= 0) {
+ pa_log_debug("RealtimeKit worked.");
+ return 0;
}
+
+ errno = -r;
#endif
- return FALSE;
+ return -1;
}
/* Raise the priority of the current process as much as possible that
@@ -680,22 +682,21 @@ pa_bool_t pa_can_high_priority(void) {
int pa_raise_priority(int nice_level) {
#ifdef HAVE_SYS_RESOURCE_H
- if (setpriority(PRIO_PROCESS, 0, nice_level) < 0) {
- int n;
+ int n;
- for (n = nice_level+1; n < 0; n++) {
+ if (set_nice(nice_level) >= 0) {
+ pa_log_info("Successfully gained nice level %i.", nice_level);
+ return 0;
+ }
- if (setpriority(PRIO_PROCESS, 0, n) == 0) {
- pa_log_info("Successfully acquired nice level %i, which is lower than the requested %i.", n, nice_level);
- return 0;
- }
+ for (n = nice_level+1; n < 0; n++)
+ if (set_nice(n) > 0) {
+ pa_log_info("Successfully acquired nice level %i, which is lower than the requested %i.", n, nice_level);
+ return 0;
}
- pa_log_warn("setpriority(): %s", pa_cstrerror(errno));
- return -1;
- }
-
- pa_log_info("Successfully gained nice level %i.", nice_level);
+ pa_log_info("Failed to acquire high-priority scheduling: %s", pa_cstrerror(errno));
+ return -1;
#endif
#ifdef OS_IS_WIN32
@@ -703,9 +704,10 @@ int pa_raise_priority(int nice_level) {
if (!SetPriorityClass(GetCurrentProcess(), HIGH_PRIORITY_CLASS)) {
pa_log_warn("SetPriorityClass() failed: 0x%08X", GetLastError());
errno = EPERM;
- return .-1;
- } else
- pa_log_info("Successfully gained high priority class.");
+ return -1;
+ }
+
+ pa_log_info("Successfully gained high priority class.");
}
#endif
@@ -720,8 +722,8 @@ void pa_reset_priority(void) {
setpriority(PRIO_PROCESS, 0, 0);
- memset(&sp, 0, sizeof(sp));
- pa_assert_se(pthread_setschedparam(pthread_self(), SCHED_OTHER, &sp) == 0);
+ pa_zero(sp);
+ pthread_setschedparam(pthread_self(), SCHED_OTHER, &sp);
#endif
#ifdef OS_IS_WIN32
diff --git a/src/pulsecore/core-util.h b/src/pulsecore/core-util.h
index b841edbb..96a0480a 100644
--- a/src/pulsecore/core-util.h
+++ b/src/pulsecore/core-util.h
@@ -80,9 +80,6 @@ int pa_make_realtime(int rtprio);
int pa_raise_priority(int nice_level);
void pa_reset_priority(void);
-pa_bool_t pa_can_realtime(void);
-pa_bool_t pa_can_high_priority(void);
-
int pa_parse_boolean(const char *s) PA_GCC_PURE;
static inline const char *pa_yes_no(pa_bool_t b) {
diff --git a/src/pulsecore/rtkit.c b/src/pulsecore/rtkit.c
new file mode 100644
index 00000000..aecc4e32
--- /dev/null
+++ b/src/pulsecore/rtkit.c
@@ -0,0 +1,189 @@
+/*-*- Mode: C; c-basic-offset: 8 -*-*/
+
+/***
+ Copyright 2009 Lennart Poettering
+
+ Permission is hereby granted, free of charge, to any person
+ obtaining a copy of this software and associated documentation files
+ (the "Software"), to deal in the Software without restriction,
+ including without limitation the rights to use, copy, modify, merge,
+ publish, distribute, sublicense, and/or sell copies of the Software,
+ and to permit persons to whom the Software is furnished to do so,
+ subject to the following conditions:
+
+ The above copyright notice and this permission notice shall be
+ included in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ SOFTWARE.
+***/
+
+#include <errno.h>
+
+#include "rtkit.h"
+
+#ifdef __linux__
+
+#ifndef _GNU_SOURCE
+#define _GNU_SOURCE
+#endif
+
+#include <string.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/syscall.h>
+
+static pid_t _gettid(void) {
+ return (pid_t) syscall(SYS_gettid);
+}
+
+static int translate_error(const char *name) {
+ if (strcmp(name, DBUS_ERROR_NO_MEMORY) == 0)
+ return -ENOMEM;
+ if (strcmp(name, DBUS_ERROR_SERVICE_UNKNOWN) == 0 ||
+ strcmp(name, DBUS_ERROR_NAME_HAS_NO_OWNER) == 0)
+ return -ENOENT;
+ if (strcmp(name, DBUS_ERROR_ACCESS_DENIED) == 0 ||
+ strcmp(name, DBUS_ERROR_AUTH_FAILED) == 0)
+ return -EACCES;
+
+ return -EIO;
+}
+
+int rtkit_make_realtime(DBusConnection *connection, pid_t thread, int priority) {
+ DBusMessage *m = NULL, *r = NULL;
+ dbus_uint64_t u64;
+ dbus_uint32_t u32;
+ DBusError error;
+ int ret;
+
+ dbus_error_init(&error);
+
+ if (thread == 0)
+ thread = _gettid();
+
+ if (!(m = dbus_message_new_method_call(
+ RTKIT_SERVICE_NAME,
+ RTKIT_OBJECT_PATH,
+ "org.freedesktop.RealtimeKit1",
+ "MakeThreadRealtime"))) {
+ ret = -ENOMEM;
+ goto finish;
+ }
+
+ u64 = (dbus_uint64_t) thread;
+ u32 = (dbus_uint32_t) priority;
+
+ if (!dbus_message_append_args(
+ m,
+ DBUS_TYPE_UINT64, &u64,
+ DBUS_TYPE_UINT32, &u32,
+ DBUS_TYPE_INVALID)) {
+ ret = -ENOMEM;
+ goto finish;
+ }
+
+ if (!(r = dbus_connection_send_with_reply_and_block(connection, m, -1, &error))) {
+ ret = translate_error(error.name);
+ goto finish;
+ }
+
+
+ if (dbus_set_error_from_message(&error, r)) {
+ ret = translate_error(error.name);
+ goto finish;
+ }
+
+ ret = 0;
+
+finish:
+
+ if (m)
+ dbus_message_unref(m);
+
+ if (r)
+ dbus_message_unref(r);
+
+ dbus_error_free(&error);
+
+ return ret;
+}
+
+int rtkit_make_high_priority(DBusConnection *connection, pid_t thread, int nice_level) {
+ DBusMessage *m = NULL, *r = NULL;
+ dbus_uint64_t u64;
+ dbus_int32_t s32;
+ DBusError error;
+ int ret;
+
+ dbus_error_init(&error);
+
+ if (thread == 0)
+ thread = _gettid();
+
+ if (!(m = dbus_message_new_method_call(
+ RTKIT_SERVICE_NAME,
+ RTKIT_OBJECT_PATH,
+ "org.freedesktop.RealtimeKit1",
+ "MakeThreadHighPriority"))) {
+ ret = -ENOMEM;
+ goto finish;
+ }
+
+ u64 = (dbus_uint64_t) thread;
+ s32 = (dbus_int32_t) nice_level;
+
+ if (!dbus_message_append_args(
+ m,
+ DBUS_TYPE_UINT64, &u64,
+ DBUS_TYPE_INT32, &s32,
+ DBUS_TYPE_INVALID)) {
+ ret = -ENOMEM;
+ goto finish;
+ }
+
+
+
+ if (!(r = dbus_connection_send_with_reply_and_block(connection, m, -1, &error))) {
+ ret = translate_error(error.name);
+ goto finish;
+ }
+
+
+ if (dbus_set_error_from_message(&error, r)) {
+ ret = translate_error(error.name);
+ goto finish;
+ }
+
+ ret = 0;
+
+finish:
+
+ if (m)
+ dbus_message_unref(m);
+
+ if (r)
+ dbus_message_unref(r);
+
+ dbus_error_free(&error);
+
+ return ret;
+}
+
+#else
+
+int rtkit_make_realtime(DBusConnection *connection, pid_t thread, int priority) {
+ return -ENOTSUP;
+}
+
+int rtkit_make_high_priority(DBusConnection *connection, pid_t thread, int nice_level) {
+ return -ENOTSUP;
+}
+
+#endif
diff --git a/src/pulsecore/rtkit.h b/src/pulsecore/rtkit.h
new file mode 100644
index 00000000..2081b4e9
--- /dev/null
+++ b/src/pulsecore/rtkit.h
@@ -0,0 +1,62 @@
+/*-*- Mode: C; c-basic-offset: 8 -*-*/
+
+#ifndef foortkithfoo
+#define foortkithfoo
+
+/***
+ Copyright 2009 Lennart Poettering
+
+ Permission is hereby granted, free of charge, to any person
+ obtaining a copy of this software and associated documentation files
+ (the "Software"), to deal in the Software without restriction,
+ including without limitation the rights to use, copy, modify, merge,
+ publish, distribute, sublicense, and/or sell copies of the Software,
+ and to permit persons to whom the Software is furnished to do so,
+ subject to the following conditions:
+
+ The above copyright notice and this permission notice shall be
+ included in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ SOFTWARE.
+***/
+
+#include <sys/types.h>
+#include <dbus/dbus.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* This is the reference implementation for a client for
+ * RealtimeKit. You don't have to use this, but if do, just copy these
+ * sources into your repository */
+
+#define RTKIT_SERVICE_NAME "org.freedesktop.RealtimeKit1"
+#define RTKIT_OBJECT_PATH "/org/freedesktop/RealtimeKit1"
+
+/* This is mostly equivalent to sched_setparam(thread, SCHED_RR, {
+ * .sched_priority = priority }). 'thread' needs to be a kernel thread
+ * id as returned by gettid(), not a pthread_t! If 'thread' is 0 the
+ * current thread is used. The returned value is a negative errno
+ * style error code, or 0 on success. */
+int rtkit_make_realtime(DBusConnection *system_bus, pid_t thread, int priority);
+
+/* This is mostly equivalent to setpriority(PRIO_PROCESS, thread,
+ * nice_level). 'thread' needs to be a kernel thread id as returned by
+ * gettid(), not a pthread_t! If 'thread' is 0 the current thread is
+ * used. The returned value is a negative errno style error code, or 0
+ * on success.*/
+int rtkit_make_high_priority(DBusConnection *system_bus, pid_t thread, int nice_level);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/src/pulsecore/rtpoll.c b/src/pulsecore/rtpoll.c
index aa8ca321..185b8211 100644
--- a/src/pulsecore/rtpoll.c
+++ b/src/pulsecore/rtpoll.c
@@ -30,10 +30,6 @@
#include <string.h>
#include <errno.h>
-#ifdef __linux__
-#include <sys/utsname.h>
-#endif
-
#ifdef HAVE_POLL_H
#include <poll.h>
#else
@@ -47,7 +43,6 @@
#include <pulsecore/rtclock.h>
#include <pulsecore/macro.h>
#include <pulsecore/llist.h>
-#include <pulsecore/rtsig.h>
#include <pulsecore/flist.h>
#include <pulsecore/core-util.h>
#include <pulsecore/winsock.h>
@@ -66,20 +61,9 @@ struct pa_rtpoll {
pa_bool_t scan_for_dead:1;
pa_bool_t running:1;
- pa_bool_t installed:1;
pa_bool_t rebuild_needed:1;
pa_bool_t quit:1;
-#ifdef HAVE_PPOLL
- pa_bool_t timer_armed:1;
-#ifdef __linux__
- pa_bool_t dont_use_ppoll:1;
-#endif
- int rtsig;
- sigset_t sigset_unblocked;
- timer_t timer;
-#endif
-
#ifdef DEBUG_TIMING
pa_usec_t timestamp;
pa_usec_t slept, awake;
@@ -107,52 +91,20 @@ struct pa_rtpoll_item {
PA_STATIC_FLIST_DECLARE(items, 0, pa_xfree);
-static void signal_handler_noop(int s) { /* write(2, "signal\n", 7); */ }
-
pa_rtpoll *pa_rtpoll_new(void) {
pa_rtpoll *p;
p = pa_xnew(pa_rtpoll, 1);
-#ifdef HAVE_PPOLL
-
-#ifdef __linux__
- /* ppoll is broken on Linux < 2.6.16 */
- p->dont_use_ppoll = FALSE;
-
- {
- struct utsname u;
- unsigned major, minor, micro;
-
- pa_assert_se(uname(&u) == 0);
-
- if (sscanf(u.release, "%u.%u.%u", &major, &minor, &micro) != 3 ||
- (major < 2) ||
- (major == 2 && minor < 6) ||
- (major == 2 && minor == 6 && micro < 16))
-
- p->dont_use_ppoll = TRUE;
- }
-
-#endif
-
- p->rtsig = -1;
- sigemptyset(&p->sigset_unblocked);
- p->timer = (timer_t) -1;
- p->timer_armed = FALSE;
-
-#endif
-
p->n_pollfd_alloc = 32;
p->pollfd = pa_xnew(struct pollfd, p->n_pollfd_alloc);
p->pollfd2 = pa_xnew(struct pollfd, p->n_pollfd_alloc);
p->n_pollfd_used = 0;
- memset(&p->next_elapse, 0, sizeof(p->next_elapse));
+ pa_zero(p->next_elapse);
p->timer_enabled = FALSE;
p->running = FALSE;
- p->installed = FALSE;
p->scan_for_dead = FALSE;
p->rebuild_needed = FALSE;
p->quit = FALSE;
@@ -167,46 +119,6 @@ pa_rtpoll *pa_rtpoll_new(void) {
return p;
}
-void pa_rtpoll_install(pa_rtpoll *p) {
- pa_assert(p);
- pa_assert(!p->installed);
-
- p->installed = TRUE;
-
-#ifdef HAVE_PPOLL
-# ifdef __linux__
- if (p->dont_use_ppoll)
- return;
-# endif
-
- if ((p->rtsig = pa_rtsig_get_for_thread()) < 0) {
- pa_log_warn("Failed to reserve POSIX realtime signal.");
- return;
- }
-
- pa_log_debug("Acquired POSIX realtime signal %s", pa_sig2str(p->rtsig));
-
- {
- sigset_t ss;
- struct sigaction sa;
-
- pa_assert_se(sigemptyset(&ss) == 0);
- pa_assert_se(sigaddset(&ss, p->rtsig) == 0);
- pa_assert_se(pthread_sigmask(SIG_BLOCK, &ss, &p->sigset_unblocked) == 0);
- pa_assert_se(sigdelset(&p->sigset_unblocked, p->rtsig) == 0);
-
- memset(&sa, 0, sizeof(sa));
- sa.sa_handler = signal_handler_noop;
- pa_assert_se(sigemptyset(&sa.sa_mask) == 0);
-
- pa_assert_se(sigaction(p->rtsig, &sa, NULL) == 0);
-
- /* We never reset the signal handler. Why should we? */
- }
-
-#endif
-}
-
static void rtpoll_rebuild(pa_rtpoll *p) {
struct pollfd *e, *t;
@@ -250,7 +162,6 @@ static void rtpoll_rebuild(pa_rtpoll *p) {
if (ra)
p->pollfd2 = pa_xrealloc(p->pollfd2, p->n_pollfd_alloc * sizeof(struct pollfd));
-
}
static void rtpoll_item_destroy(pa_rtpoll_item *i) {
@@ -279,11 +190,6 @@ void pa_rtpoll_free(pa_rtpoll *p) {
pa_xfree(p->pollfd);
pa_xfree(p->pollfd2);
-#ifdef HAVE_PPOLL
- if (p->timer != (timer_t) -1)
- timer_delete(p->timer);
-#endif
-
pa_xfree(p);
}
@@ -321,7 +227,6 @@ int pa_rtpoll_run(pa_rtpoll *p, pa_bool_t wait) {
pa_assert(p);
pa_assert(!p->running);
- pa_assert(p->installed);
p->running = TRUE;
@@ -402,22 +307,15 @@ int pa_rtpoll_run(pa_rtpoll *p, pa_bool_t wait) {
/* OK, now let's sleep */
#ifdef HAVE_PPOLL
-
-#ifdef __linux__
- if (!p->dont_use_ppoll)
-#endif
{
struct timespec ts;
ts.tv_sec = timeout.tv_sec;
ts.tv_nsec = timeout.tv_usec * 1000;
- r = ppoll(p->pollfd, p->n_pollfd_used, (!wait || p->quit || p->timer_enabled) ? &ts : NULL, p->rtsig < 0 ? NULL : &p->sigset_unblocked);
+ r = ppoll(p->pollfd, p->n_pollfd_used, (!wait || p->quit || p->timer_enabled) ? &ts : NULL, NULL);
}
-#ifdef __linux__
- else
-#endif
-
-#endif
+#else
r = poll(p->pollfd, p->n_pollfd_used, (!wait || p->quit || p->timer_enabled) ? (int) ((timeout.tv_sec*1000) + (timeout.tv_usec / 1000)) : -1);
+#endif
#ifdef DEBUG_TIMING
{
@@ -472,73 +370,11 @@ finish:
return r < 0 ? r : !p->quit;
}
-static void update_timer(pa_rtpoll *p) {
- pa_assert(p);
-
-#ifdef HAVE_PPOLL
-
-#ifdef __linux__
- if (p->dont_use_ppoll)
- return;
-#endif
-
- if (p->timer == (timer_t) -1) {
- struct sigevent se;
-
- memset(&se, 0, sizeof(se));
- se.sigev_notify = SIGEV_SIGNAL;
- se.sigev_signo = p->rtsig;
-
- if (timer_create(CLOCK_MONOTONIC, &se, &p->timer) < 0)
- if (timer_create(CLOCK_REALTIME, &se, &p->timer) < 0) {
- pa_log_warn("Failed to allocate POSIX timer: %s", pa_cstrerror(errno));
- p->timer = (timer_t) -1;
- }
- }
-
- if (p->timer != (timer_t) -1) {
- struct itimerspec its;
- struct timespec ts = { .tv_sec = 0, .tv_nsec = 0 };
- sigset_t ss;
-
- if (p->timer_armed) {
- /* First disarm timer */
- memset(&its, 0, sizeof(its));
- pa_assert_se(timer_settime(p->timer, TIMER_ABSTIME, &its, NULL) == 0);
-
- /* Remove a signal that might be waiting in the signal q */
- pa_assert_se(sigemptyset(&ss) == 0);
- pa_assert_se(sigaddset(&ss, p->rtsig) == 0);
- sigtimedwait(&ss, NULL, &ts);
- }
-
- /* And install the new timer */
- if (p->timer_enabled) {
- memset(&its, 0, sizeof(its));
-
- its.it_value.tv_sec = p->next_elapse.tv_sec;
- its.it_value.tv_nsec = p->next_elapse.tv_usec*1000;
-
- /* Make sure that 0,0 is not understood as
- * "disarming" */
- if (its.it_value.tv_sec == 0 && its.it_value.tv_nsec == 0)
- its.it_value.tv_nsec = 1;
- pa_assert_se(timer_settime(p->timer, TIMER_ABSTIME, &its, NULL) == 0);
- }
-
- p->timer_armed = p->timer_enabled;
- }
-
-#endif
-}
-
void pa_rtpoll_set_timer_absolute(pa_rtpoll *p, pa_usec_t usec) {
pa_assert(p);
pa_timeval_store(&p->next_elapse, usec);
p->timer_enabled = TRUE;
-
- update_timer(p);
}
void pa_rtpoll_set_timer_relative(pa_rtpoll *p, pa_usec_t usec) {
@@ -550,8 +386,6 @@ void pa_rtpoll_set_timer_relative(pa_rtpoll *p, pa_usec_t usec) {
pa_rtclock_get(&p->next_elapse);
pa_timeval_add(&p->next_elapse, usec);
p->timer_enabled = TRUE;
-
- update_timer(p);
}
void pa_rtpoll_set_timer_disabled(pa_rtpoll *p) {
@@ -559,8 +393,6 @@ void pa_rtpoll_set_timer_disabled(pa_rtpoll *p) {
memset(&p->next_elapse, 0, sizeof(p->next_elapse));
p->timer_enabled = FALSE;
-
- update_timer(p);
}
pa_rtpoll_item *pa_rtpoll_item_new(pa_rtpoll *p, pa_rtpoll_priority_t prio, unsigned n_fds) {
diff --git a/src/pulsecore/rtpoll.h b/src/pulsecore/rtpoll.h
index 08776ef0..d2d69cad 100644
--- a/src/pulsecore/rtpoll.h
+++ b/src/pulsecore/rtpoll.h
@@ -62,9 +62,6 @@ typedef enum pa_rtpoll_priority {
pa_rtpoll *pa_rtpoll_new(void);
void pa_rtpoll_free(pa_rtpoll *p);
-/* Install the rtpoll in the current thread */
-void pa_rtpoll_install(pa_rtpoll *p);
-
/* Sleep on the rtpoll until the time event, or any of the fd events
* is triggered. If "wait" is 0 we don't sleep but only update the
* struct pollfd. Returns negative on error, positive if the loop
diff --git a/src/pulsecore/rtsig.c b/src/pulsecore/rtsig.c
deleted file mode 100644
index 4cd6aa8f..00000000
--- a/src/pulsecore/rtsig.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/***
- This file is part of PulseAudio.
-
- Copyright 2004-2006 Lennart Poettering
- Copyright 2006 Pierre Ossman <ossman@cendio.se> for Cendio AB
-
- PulseAudio is free software; you can redistribute it and/or modify
- it under the terms of the GNU Lesser General Public License as
- published by the Free Software Foundation; either version 2.1 of the
- License, or (at your option) any later version.
-
- PulseAudio is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General Public
- License along with PulseAudio; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- USA.
-***/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#include <signal.h>
-
-#include <pulsecore/macro.h>
-#include <pulsecore/flist.h>
-#include <pulsecore/once.h>
-#include <pulsecore/thread.h>
-#include <pulsecore/core-util.h>
-
-#include "rtsig.h"
-
-#ifdef SIGRTMIN
-
-static void _free_rtsig(void *p) {
- pa_rtsig_put(PA_PTR_TO_INT(p));
-}
-
-PA_STATIC_FLIST_DECLARE(rtsig_flist, pa_make_power_of_two((unsigned) (SIGRTMAX-SIGRTMIN+1)), NULL);
-PA_STATIC_TLS_DECLARE(rtsig_tls, _free_rtsig);
-
-static pa_atomic_t rtsig_current = PA_ATOMIC_INIT(-1);
-
-static int rtsig_start = -1, rtsig_end = -1;
-
-int pa_rtsig_get(void) {
- void *p;
- int sig;
-
- if ((p = pa_flist_pop(PA_STATIC_FLIST_GET(rtsig_flist))))
- return PA_PTR_TO_INT(p);
-
- sig = pa_atomic_dec(&rtsig_current);
-
- pa_assert(sig <= SIGRTMAX);
- pa_assert(sig <= rtsig_end);
-
- if (sig < rtsig_start) {
- pa_atomic_inc(&rtsig_current);
- return -1;
- }
-
- return sig;
-}
-
-int pa_rtsig_get_for_thread(void) {
- int sig;
- void *p;
-
- if ((p = PA_STATIC_TLS_GET(rtsig_tls)))
- return PA_PTR_TO_INT(p);
-
- if ((sig = pa_rtsig_get()) < 0)
- return -1;
-
- PA_STATIC_TLS_SET(rtsig_tls, PA_INT_TO_PTR(sig));
- return sig;
-}
-
-void pa_rtsig_put(int sig) {
- pa_assert(sig >= rtsig_start);
- pa_assert(sig <= rtsig_end);
-
- pa_assert_se(pa_flist_push(PA_STATIC_FLIST_GET(rtsig_flist), PA_INT_TO_PTR(sig)) >= 0);
-}
-
-void pa_rtsig_configure(int start, int end) {
- int s;
- sigset_t ss;
-
- pa_assert(pa_atomic_load(&rtsig_current) == -1);
-
- pa_assert(SIGRTMIN <= start);
- pa_assert(start <= end);
- pa_assert(end <= SIGRTMAX);
-
- rtsig_start = start;
- rtsig_end = end;
-
- sigemptyset(&ss);
-
- for (s = rtsig_start; s <= rtsig_end; s++)
- pa_assert_se(sigaddset(&ss, s) == 0);
-
- pa_assert(pthread_sigmask(SIG_BLOCK, &ss, NULL) == 0);
-
- /* We allocate starting from the end */
- pa_atomic_store(&rtsig_current, rtsig_end);
-}
-
-#else /* SIGRTMIN */
-
-int pa_rtsig_get(void) {
- return -1;
-}
-
-int pa_rtsig_get_for_thread(void) {
- return -1;
-}
-
-void pa_rtsig_put(int sig) {
-}
-
-void pa_rtsig_configure(int start, int end) {
-}
-
-#endif /* SIGRTMIN */
diff --git a/src/pulsecore/rtsig.h b/src/pulsecore/rtsig.h
deleted file mode 100644
index e414122d..00000000
--- a/src/pulsecore/rtsig.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef foopulsertsighfoo
-#define foopulsertsighfoo
-
-/***
- This file is part of PulseAudio.
-
- Copyright 2004-2006 Lennart Poettering
-
- PulseAudio is free software; you can redistribute it and/or modify
- it under the terms of the GNU Lesser General Public License as
- published by the Free Software Foundation; either version 2.1 of the
- License, or (at your option) any later version.
-
- PulseAudio is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General Public
- License along with PulseAudio; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- USA.
-***/
-
-/* Return the next unused POSIX Realtime signals */
-int pa_rtsig_get(void);
-
-/* If not called before in the current thread, return the next unused
- * rtsig, and install it in a TLS region and give it up automatically
- * when the thread shuts down */
-int pa_rtsig_get_for_thread(void);
-
-/* Give an rtsig back. */
-void pa_rtsig_put(int sig);
-
-/* Block all RT signals */
-void pa_rtsig_configure(int start, int end);
-
-#endif
diff --git a/src/tests/rtpoll-test.c b/src/tests/rtpoll-test.c
index 4ac96446..1706cdfa 100644
--- a/src/tests/rtpoll-test.c
+++ b/src/tests/rtpoll-test.c
@@ -26,7 +26,6 @@
#include <pulsecore/log.h>
#include <pulsecore/rtpoll.h>
-#include <pulsecore/rtsig.h>
static int before(pa_rtpoll_item *i) {
pa_log("before");
@@ -47,10 +46,6 @@ int main(int argc, char *argv[]) {
pa_rtpoll_item *i, *w;
struct pollfd *pollfd;
-#ifdef SIGRTMIN
- pa_rtsig_configure(SIGRTMIN+10, SIGRTMAX);
-#endif
-
p = pa_rtpoll_new();
i = pa_rtpoll_item_new(p, PA_RTPOLL_EARLY, 1);
@@ -64,7 +59,6 @@ int main(int argc, char *argv[]) {
w = pa_rtpoll_item_new(p, PA_RTPOLL_NORMAL, 0);
pa_rtpoll_item_set_before_callback(w, worker);
- pa_rtpoll_install(p);
pa_rtpoll_set_timer_relative(p, 10000000); /* 10 s */
pa_rtpoll_run(p, 1);