Add support for Broadcom BCM2035 chips

1 files changed, 114 insertions, 0 deletions

diff --git a/tools/hciattach.c b/tools/hciattach.c
index 6a806039..e583e8db 100644
--- a/tools/hciattach.c
+++ b/tools/hciattach.c
@@ -802,6 +802,117 @@ static int st(int fd, struct uart_t *u, struct termios *ti)
 	return 0;
 }
 
+
+/*
+ * Broadcom specific initialization
+ * Extracted from Jungo openrg
+ */
+static int bcm2035(int fd, struct uart_t *u, struct termios *ti)
+{
+	int n;
+	unsigned char cmd[30], resp[30];
+
+	/* Reset the BT Chip */
+	memset(cmd, 0, sizeof(cmd));
+	memset(resp, 0, sizeof(resp));
+	cmd[0] = HCI_COMMAND_PKT;
+	cmd[1] = 0x03;
+	cmd[2] = 0x0c;
+	cmd[3] = 0x00;
+	/* Send command */
+	if (write(fd, cmd, 4) != 4) {
+		fprintf(stderr, "Failed to write reset command\n");
+		return -1;
+	}
+	/* Read reply */
+	if ((n = read_hci_event(fd, resp, 4)) < 0) {
+		fprintf(stderr, "Failed to reset chip\n");
+		return -1;
+	}
+
+	/* Read the local version info */
+	memset(cmd, 0, sizeof(cmd));
+	memset(resp, 0, sizeof(resp));
+	cmd[0] = HCI_COMMAND_PKT;
+	cmd[1] = 0x01;
+	cmd[2] = 0x10;
+	cmd[3] = 0x00;
+	/* Send command */
+	if (write(fd, cmd, 4) != 4) {
+		fprintf(stderr, "Failed to write \"read local version\" "
+			"command\n");
+		return -1;
+	}
+	/* Read reply */
+	if ((n = read_hci_event(fd, resp, 4)) < 0) {
+		fprintf(stderr, "Failed to read local version\n");
+		return -1;
+	}
+
+	/* Read the local supported commands info */
+	memset(cmd, 0, sizeof(cmd));
+	memset(resp, 0, sizeof(resp));
+	cmd[0] = HCI_COMMAND_PKT;
+	cmd[1] = 0x02;
+	cmd[2] = 0x10;
+	cmd[3] = 0x00;
+	/* Send command */
+	if (write(fd, cmd, 4) != 4) {
+		fprintf(stderr, "Failed to write \"read local supported "
+			"commands\" command\n");
+		return -1;
+	}
+	/* Read reply */
+	if ((n = read_hci_event(fd, resp, 4)) < 0) {
+		fprintf(stderr, "Failed to read local supported commands\n");
+		return -1;
+	}
+
+	/* Set the baud rate */
+	memset(cmd, 0, sizeof(cmd));
+	memset(resp, 0, sizeof(resp));
+	cmd[0] = HCI_COMMAND_PKT;
+	cmd[1] = 0x18;
+	cmd[2] = 0xfc;
+	cmd[3] = 0x02;
+	switch (u->speed) {
+	case 57600:
+		cmd[4] = 0x00;
+		cmd[5] = 0xe6;
+		break;
+	case 230400:
+		cmd[4] = 0x22;
+		cmd[5] = 0xfa;
+		break;
+	case 460800:
+		cmd[4] = 0x11;
+		cmd[5] = 0xfd;
+		break;
+	case 921600:
+		cmd[4] = 0x65;
+		cmd[5] = 0xff;
+		break;
+	default:
+		/* Default is 115200 */
+		cmd[4] = 0x00;
+		cmd[5] = 0xf3;
+		break;
+	}
+	fprintf(stderr, "Baud rate parameters: DHBR=0x%2x,DLBR=0x%2x\n",
+		cmd[4], cmd[5]);
+
+	/* Send command */
+	if (write(fd, cmd, 6) != 6) {
+		fprintf(stderr, "Failed to write \"set baud rate\" command\n");
+		return -1;
+	}
+	if ((n = read_hci_event(fd, resp, 6)) < 0) {
+		fprintf(stderr, "Failed to set baud rate\n");
+		return -1;
+	}
+	return 0;
+}
+
 struct uart_t uart[] = {
 	{ "any",        0x0000, 0x0000, HCI_UART_H4,   115200, 115200, FLOW_CTL, NULL     },
 	{ "ericsson",   0x0000, 0x0000, HCI_UART_H4,   57600,  115200, FLOW_CTL, ericsson },
@@ -855,6 +966,9 @@ struct uart_t uart[] = {
 	/* Billionton PCBTC1 PCMCIA Card */
 	{ "billionton", 0x0279, 0x950b, HCI_UART_BCSP, 115200, 115200, 0,        bcsp     },
 
+	/* Broadcom BCM2035 */
+	{ "bcm2035",    0x0A5C, 0x2035, HCI_UART_H4,   115200, 115200, 0,        bcm2035  },
+
 	{ NULL, 0 }
 };