Limit rate adjustments to small, inaudible jumps

The same logic is applied to the sample rate adjustments in module-rtp-recv,
module-loopback and module-combine:
 - Each time an adjustment is made, the new rate can differ at most 2‰ from the
   old rate.  Such a step is equal to 3.5 cents (a cent is 1/100th of a
   semitone) and as 5 cents is generally considered the smallest observable
   difference in pitch, this results in inaudible adjustments.
 - The sample rate of the stream can only differ from the rate of the
   corresponding sink by 25%.  As these adjustments are meant to account for
   very small clock drifts, any large deviation from the base rate suggests
   something is seriously wrong.
 - If the calculated rate is within 20Hz of the base rate, set it to the base
   rate.  This saves CPU because no resampling is necessary.

3 files changed, 52 insertions, 26 deletions

diff --git a/src/modules/module-combine.c b/src/modules/module-combine.c
index bcea229f..3104ed68 100644
--- a/src/modules/module-combine.c
+++ b/src/modules/module-combine.c
@@ -217,23 +217,29 @@ static void adjust_rates(struct userdata *u) {
     base_rate = u->sink->sample_spec.rate;
 
     PA_IDXSET_FOREACH(o, u->outputs, idx) {
-        uint32_t r = base_rate;
+        uint32_t new_rate = base_rate;
+        uint32_t current_rate = o->sink_input->sample_spec.rate;
 
         if (!o->sink_input || !PA_SINK_IS_OPENED(pa_sink_get_state(o->sink)))
             continue;
 
-        if (o->total_latency < target_latency)
-            r -= (uint32_t) ((((double) (target_latency - o->total_latency))/(double)u->adjust_time)*(double)r);
-        else if (o->total_latency > target_latency)
-            r += (uint32_t) ((((double) (o->total_latency - target_latency))/(double)u->adjust_time)*(double)r);
+        if (o->total_latency != target_latency)
+            new_rate += (uint32_t) (((double) o->total_latency - (double) target_latency) / (double) u->adjust_time * (double) new_rate);
 
-        if (r < (uint32_t) (base_rate*0.9) || r > (uint32_t) (base_rate*1.1)) {
-            pa_log_warn("[%s] sample rates too different, not adjusting (%u vs. %u).", o->sink_input->sink->name, base_rate, r);
-            pa_sink_input_set_rate(o->sink_input, base_rate);
+        if (new_rate < (uint32_t) (base_rate*0.8) || new_rate > (uint32_t) (base_rate*1.25)) {
+            pa_log_warn("[%s] sample rates too different, not adjusting (%u vs. %u).", o->sink_input->sink->name, base_rate, new_rate);
+            new_rate = base_rate;
         } else {
-            pa_log_info("[%s] new rate is %u Hz; ratio is %0.3f; latency is %0.0f usec.", o->sink_input->sink->name, r, (double) r / base_rate, (float) o->total_latency);
-            pa_sink_input_set_rate(o->sink_input, r);
+            if (base_rate < new_rate + 20 && new_rate < base_rate + 20)
+              new_rate = base_rate;
+            /* Do the adjustment in small steps; 2‰ can be considered inaudible */
+            if (new_rate < (uint32_t) (current_rate*0.998) || new_rate > (uint32_t) (current_rate*1.002)) {
+                pa_log_info("[%s] new rate of %u Hz not within 2‰ of %u Hz, forcing smaller adjustment", o->sink_input->sink->name, new_rate, current_rate);
+                new_rate = PA_CLAMP(new_rate, (uint32_t) (current_rate*0.998), (uint32_t) (current_rate*1.002));
+            }
+            pa_log_info("[%s] new rate is %u Hz; ratio is %0.3f; latency is %0.2f msec.", o->sink_input->sink->name, new_rate, (double) new_rate / base_rate, (double) o->total_latency / PA_USEC_PER_MSEC);
         }
+        pa_sink_input_set_rate(o->sink_input, new_rate);
     }
 
     pa_asyncmsgq_send(u->sink->asyncmsgq, PA_MSGOBJECT(u->sink), SINK_MESSAGE_UPDATE_LATENCY, NULL, (int64_t) avg_total_latency, NULL);
diff --git a/src/modules/module-loopback.c b/src/modules/module-loopback.c
index ca06314d..e0277c17 100644
--- a/src/modules/module-loopback.c
+++ b/src/modules/module-loopback.c
@@ -167,13 +167,13 @@ static void adjust_rates(struct userdata *u) {
 
     buffer_latency = pa_bytes_to_usec(buffer, &u->sink_input->sample_spec);
 
-    pa_log_info("Loopback overall latency is %0.2f ms + %0.2f ms + %0.2f ms = %0.2f ms",
+    pa_log_debug("Loopback overall latency is %0.2f ms + %0.2f ms + %0.2f ms = %0.2f ms",
                 (double) u->latency_snapshot.sink_latency / PA_USEC_PER_MSEC,
                 (double) buffer_latency / PA_USEC_PER_MSEC,
                 (double) u->latency_snapshot.source_latency / PA_USEC_PER_MSEC,
                 ((double) u->latency_snapshot.sink_latency + buffer_latency + u->latency_snapshot.source_latency) / PA_USEC_PER_MSEC);
 
-    pa_log_info("Should buffer %zu bytes, buffered at minimum %zu bytes",
+    pa_log_debug("Should buffer %zu bytes, buffered at minimum %zu bytes",
                 u->latency_snapshot.max_request*2,
                 u->latency_snapshot.min_memblockq_length);
 
@@ -186,9 +186,21 @@ static void adjust_rates(struct userdata *u) {
     else
         new_rate = base_rate + (((u->latency_snapshot.min_memblockq_length - u->latency_snapshot.max_request*2) / fs) *PA_USEC_PER_SEC)/u->adjust_time;
 
-    pa_log_info("Old rate %lu Hz, new rate %lu Hz", (unsigned long) old_rate, (unsigned long) new_rate);
+    if (new_rate < (uint32_t) (base_rate*0.8) || new_rate > (uint32_t) (base_rate*1.25)) {
+        pa_log_warn("Sample rates too different, not adjusting (%u vs. %u).", base_rate, new_rate);
+        new_rate = base_rate;
+    } else {
+        if (base_rate < new_rate + 20 && new_rate < base_rate + 20)
+          new_rate = base_rate;
+        /* Do the adjustment in small steps; 2‰ can be considered inaudible */
+        if (new_rate < (uint32_t) (old_rate*0.998) || new_rate > (uint32_t) (old_rate*1.002)) {
+            pa_log_info("New rate of %u Hz not within 2‰ of %u Hz, forcing smaller adjustment", new_rate, old_rate);
+            new_rate = PA_CLAMP(new_rate, (uint32_t) (old_rate*0.998), (uint32_t) (old_rate*1.002));
+        }
+    }
 
     pa_sink_input_set_rate(u->sink_input, new_rate);
+    pa_log_debug("[%s] Updated sampling rate to %lu Hz.", u->sink_input->sink->name, (unsigned long) new_rate);
 
     pa_core_rttime_restart(u->core, u->time_event, pa_rtclock_now() + u->adjust_time);
 }
diff --git a/src/modules/rtp/module-rtp-recv.c b/src/modules/rtp/module-rtp-recv.c
index 1a05f57d..491be4dc 100644
--- a/src/modules/rtp/module-rtp-recv.c
+++ b/src/modules/rtp/module-rtp-recv.c
@@ -288,6 +288,9 @@ static int rtpoll_work_cb(pa_rtpoll_item *i) {
     if (s->last_rate_update + RATE_UPDATE_INTERVAL < pa_timeval_load(&now)) {
         pa_usec_t wi, ri, render_delay, sink_delay = 0, latency, fix;
         unsigned fix_samples;
+        uint32_t base_rate = s->sink_input->sink->sample_spec.rate;
+        uint32_t current_rate = s->sink_input->sample_spec.rate;
+        uint32_t new_rate;
 
         pa_log_debug("Updating sample rate");
 
@@ -309,7 +312,7 @@ static int rtpoll_work_cb(pa_rtpoll_item *i) {
         else
             latency = wi - ri;
 
-        pa_log_debug("Write index deviates by %0.2f ms, expected %0.2f ms", (double) latency/PA_USEC_PER_MSEC, (double)  s->intended_latency/PA_USEC_PER_MSEC);
+        pa_log_debug("Write index deviates by %0.2f ms, expected %0.2f ms", (double) latency/PA_USEC_PER_MSEC, (double) s->intended_latency/PA_USEC_PER_MSEC);
 
         /* Calculate deviation */
         if (latency < s->intended_latency)
@@ -320,19 +323,24 @@ static int rtpoll_work_cb(pa_rtpoll_item *i) {
         /* How many samples is this per second? */
         fix_samples = (unsigned) (fix * (pa_usec_t) s->sink_input->thread_info.sample_spec.rate / (pa_usec_t) RATE_UPDATE_INTERVAL);
 
-        /* Check if deviation is in bounds */
-        if (fix_samples > s->sink_input->sample_spec.rate*.50)
-            pa_log_debug("Hmmm, rate fix is too large (%lu Hz), not applying.", (unsigned long) fix_samples);
-        else {
-            /* Fix up rate */
-            if (latency < s->intended_latency)
-                s->sink_input->sample_spec.rate -= fix_samples;
-            else
-                s->sink_input->sample_spec.rate += fix_samples;
-
-            if (s->sink_input->sample_spec.rate > PA_RATE_MAX)
-                s->sink_input->sample_spec.rate = PA_RATE_MAX;
+        if (latency < s->intended_latency)
+            new_rate = current_rate - fix_samples;
+        else
+            new_rate = current_rate + fix_samples;
+
+        if (new_rate < (uint32_t) (base_rate*0.8) || new_rate > (uint32_t) (base_rate*1.25)) {
+            pa_log_warn("Sample rates too different, not adjusting (%u vs. %u).", base_rate, new_rate);
+            new_rate = base_rate;
+        } else {
+            if (base_rate < new_rate + 20 && new_rate < base_rate + 20)
+              new_rate = base_rate;
+            /* Do the adjustment in small steps; 2‰ can be considered inaudible */
+            if (new_rate < (uint32_t) (current_rate*0.998) || new_rate > (uint32_t) (current_rate*1.002)) {
+                pa_log_info("New rate of %u Hz not within 2‰ of %u Hz, forcing smaller adjustment", new_rate, current_rate);
+                new_rate = PA_CLAMP(new_rate, (uint32_t) (current_rate*0.998), (uint32_t) (current_rate*1.002));
+            }
         }
+        s->sink_input->sample_spec.rate = new_rate;
 
         pa_assert(pa_sample_spec_valid(&s->sink_input->sample_spec));